2023年1月19日 · To quickly recap, G0 and G1 are the G-codes for Linear Move, where G0 refers to movement without extrusion, and G1 allows the printer to extrude while moving. On the other hand, G2 and G3 are the G-codes for Arc or Circle Move, where G2 is for clockwise arc movement, and G3 is for counter-clockwise arc movement.

2011年12月8日 · G0 (G zero) tells the machine to move as quickly as possible to a given point (absolute or relative, depending on the setting of G90 or 91). This command is modal, so any coordinates that follow will be rapid as well (until a Group 01 code is called). As with all G codes, it specifies only the destination point.

The G0 is optional if the current motion mode is G0. This will produce co-ordinated linear motion to the destination point at the current traverse rate (or slower if the machine will not go that fast). It is expected that cutting will not take place when a G0 command is executing.

G0 X10 Y10.5 (移動 X軸10mm Y軸10.5mm) 結果G90為黑色點，G91為粉紅色點，如果G91並未填寫，像以下打法，將只會有黑色點 (也就是移動相同的座標)

2024年3月20日 · Even the "G" word from which the name "G-Code" comes from has an address that determines which G-Code we're talking about-"G00" is the G-Word with a "00" address and initiates rapid motion modes. A good CNC Simulator will have the ability to define the Word Address formats to fit whatever your controller expects (they can vary quite a lot from ...

G0 moves to the specified position at the maximum motor rate. The coordinates may be either absolute positions or incremental distances. G0 is modal and remains in effect until another positioning mode (G1, G2, G3 etc.) is commanded. G0 is the default-positioning mode. Example: G0 X0.0 Z0.0 This command moves both X and Z to the absolute

2022年9月4日 · 这个命令把刀具从当前位置移动到命令指定的位置 (在绝对坐标方式下)， 或者移动到某个距离处 (在增量坐标方式下)。 2. 非直线切削形式的定位.

2025年2月2日 · For rapid motion, program G0 axes, where all the axis words are optional. The G0 is optional if the current motion mode is G0. This will produce coordinated motion to the destination point at the maximum rapid rate (or slower). G0 is typically used as a positioning move. 3.1. Rapid Velocity Rate. See G90 & M2 sections for more information.

Moves one or more of the axes, at the rapid speed, to a specified location or a specified distance away from the current position. Location is designated by absolute coordinates when this command is preceded by the Absolute Coordinate command.

2025年2月11日 · If you issue a G0 or G00 command the machine is in rapid and you do not need to re-state it. Rapid means all motors are flat out, like a teenager in a Ferrari. Every move from then on will be a rapid move unless you tell it otherwise. The G code that changes it must be in the same group.