2025年3月21日 · The Suzuki G16B engine features an aluminum cylinder block with wet liners and aluminum cylinder head with single overhead camshafts (SOHC) and four valves per cylinder (16 in total). Cylinder bore and piston stroke are 75.0 mm (2.95 in) …

2025年2月10日 · One of the key features of the G16B engine is its design. It employs a dual overhead camshaft (DOHC) configuration, which enhances its ability to breathe, resulting in better power output compared to its predecessors.

This 1298 cc DOHC 16-valve engine with bore and stroke of 74mm x 75.5mm (2.91 in x 2.97 in). It uses the older distributor driven off the intake camshaft, and produces approximately 75–101 hp (56–75 kW; 76–102 PS) at 6500 rpm / 109–112 N⋅m (80–83 lb⋅ft) at 5000 rpm.

2008年1月26日 · While the majority of engines with 16V per cylinder have DOHC the G16B and some other engines (Honda D16) have a SOHC and use rockers to actuate the valve and it looks like this. The camshaft runs almost directly underneath the intake valves and the lobes push down on the rocker in turn pushing on the valve.

2008年10月29日 · The engine type should be etced into the back driver side portion of the block. You'll need a mirror. According to wiki the g16a is the 1.6l sohc engine and the g16b is the 1.6l dohc The dohc on the suzuki engines usually have timing chains instead of belts.

G13B型 的排氣量1,298c.c.，缸徑74.0mm、衝程75.5mm，採16汽門DOHC結構，可輸出最大馬力100hp / 6,500rpm，最大扭力83ft·lb / 5,000rpm。 壓縮比為10.1：1，但性能版GTi則為11.1：1。 車型： G13BA型 的排氣量1,298c.c.，缸徑74.0mm、衝程75.5mm、壓縮比8.9：1，採8汽門SOHC結構，外銷版可輸出最大馬力66hp / 6,000rpm，最大扭力10.5kg·m / 3,500rpm；日規版則可輸出最大馬力70ps / 6,000rpm，最大扭力10.4kg·m / 3,500rpm。

2017年11月23日 · G13B crank has a 75.5mm stroke, 45mm mains, and 42mm rod journals? 79mm bores have been achieved, therefore I would suggest a destroked honda d16 crank with 40mm crankpins to suit nissan e15 rods and dished pistons with 8.5 to 9 comp for boost. 1745cc with the g16 16v head should theoretically make 400hp.

2010年11月4日 · The G16A block was used on both the 8V SOHC and the early 16V SOHC, the G16B was used on the later 16V SOHC. The G13B DOHC will fit the G16 block, take a look on RedlineGTI.com or Teamswift.net for a few examples. The posts I could read about the G13B 1.3 DOHC head swap to G16B block claim for a 120 to 135 HP final setup ...

2024年7月24日 · These motors are equipped with distributed injection and piston with a compression ratio of 9.5. Such motors are called G16B worldwide, but in Japan, Indonesia and some other countries the name remains the same – G16A.

G13BA 1298cc 85.558kg. The complete engine as you might expect to be lifting it out (with manifolds, carburetor, air cleaner, alternator, clutch, radiator hoses and oil but no starter motor)