2015年1月27日 · I did a scan and i got a code for the MAF sensor and 1772 Signal Cable Of Pressure Sensor For Self Leveling Control G291. I opened the Air Pump Relay and noticed a …

2011年3月31日 · The G291 Pressure Sensor is actually inside the "air suspension valve body" and cannot be separately replaced because it is epoxied into the valve body. You would need …

2018年3月28日 · is it built into the air valve block ? can it be purchased or changed separately or with the whole valve block ? No, it’s integrated in the valve block so can’t be replaced …

2017年9月6日 · The intermittent 01772 code indicates that the harness that feeds the level control pressure sensor has an intermittent short on it's 12V positive wire. The G291 sensor is part of …

2010年1月13日 · Due to the fact that my Air suspesion stay on MANUAL , and only drops the car automatically I did a VACOM run and it gave me an error on the G291 valve. Did some …

01772 - Signal from Level Control Pressure Sensor (G291): Short-Circuit to Ground (GND) May be stored in conjunction with 00453, 01583, 01770, 01772, 02645 and/or 02646.

2017年3月11日 · G291 sensor is the internal to the valve block mounted on the compressor bracket. It is the unit with the six air lines going to it as well as a 10 pin multi-pin connector …

2004年2月17日 · My air suspension gives a occasional 01772 code =Level Control Pressure sensor -G291 Implausible signal, sporadic. No leaks/settling of the air bags. Compressor …

2023年6月15日 · After changing the bellows, the car lifted all the way to the maximum level. If it matters, he changed the bellows without using Vcds for bleed and charge the air bellows. The …

2017年9月6日 · Hi is any body know what is a voltage range from pressure sensor g291 audi allroad on the red wire to the control module for the suspension system