2022年2月14日 · G1Z20F5000 (This is where is stops, and says G41/G42 interference) G41X0Y-18.75F1600D8 G3J18.75 G3J18.75 G0G40X0Y0 G0Z100. Any help would be much appreciated Similar Threads: Help with Chuck interference; Electrical Interference; Interference Issues; Need Help!-BOB's input interference, help please! Hf Interference

2008年9月28日 · It is only trying to follow the programmed path and move to the left (G41) or right (G42). Further, on many milling machines, you can use a negative value for the tool diameter which effectively puts the tool to the opposite side. In other words, running G41 with a negative tool diameter will put the tool to the right of the programmed path.

2009年5月10日 · G41/G42 is diameter compensation, G43/44 is tool length comp. The general rule AFAIK is the G41/G42 has to be implemented at least 1 block ahead at a distance of Tool radius minimum. I am not a machinist so I may not be …

2015年11月28日 · Fusion 360 was a modified post I put together to implement G41/G42 (it was commented out, I guess for good reason). It may also be that I needed a smaller cutter because of arc-in distance. Side note: I did email Tormach support regarding this and received back: "I have never used it personally but I know customers have used it successfully so ...

2007年4月14日 · Note you have commanded Y.49 movement, its less then your cutter of 1/2, its not possible..... or you are moving in Y+ direction (right!) to take cut using compensatation G41 and after moving in x13.11 you are leaving compensatation G40 and Y+ 1.04 this is wrong.... you must have to leave cutter compensatation in Y- direction ....

2023年2月22日 · G41 & G42 force a feed move and is controlled by a feed action Rapid is (older machines) where each axis runs at max rate to target point.... a bit hard if you descend into a solid part, then use comp to adjust the toolpath while still cutting material. The 0.05 comp adjust is in what direction ? Going in what direction ?

2011年10月13日 · the manual has no specific parameter setting to cancel G41/G42 with reset. parameter 5003 might help. bit 6 and bit 7 when set to 1 will clear wear and geometry offsets when reset is pressed. bit 2 when set to 1 *will* cancel tool nose radius compensation but only when the machine is zero-returned.

2012年12月16日 · it may depend on the control but the correct way is to put a D on the line with G41/G42 each time it is used. the machine *may* remember the D and it *may* not be necessary. you will need to test it on the machine with one G41 D... and then G40 then another G41 without a D and see if it compensates the diameter offset correctly. if not you need to put a D on each line where G41/G42 is used. to ...

G41/G42 interference; Problem-G40, G41, G42 / Problem with G41 & G42? Ver. 4.32 Kflop board. Problem-Error: PS0041 INTERFERENCE G41/G42; Problem-G41/G42 during G71 in Fanuc 18-T; Fanuc O-M g41 g42 problems

2017年12月19日 · Only use G41 when climb milling, G42 is for Conventional milling and rarely used on CNC mills. G40 cancels cutter comp. It sounds to me like what you really need to do is study up on how to use your CAM and learn what's going on with G code. You can't just insert a G41 in your code and expect it to work correctly.