2017/2022 Audi A6 Vacuum Sensor G608 LocationBest Car Fixes

2019年8月17日 · I bought a used 2018 Audi S3 last weekend from a Mazda dealership. Had the PPI done by the Audi dealership down the road. PPI came back clean besides "Fault Stored During GFF For G608 Brake Vacuum/Pressure Sensor Implausible Signal" but they assured me it would be covered for free under warranty.

Replace the “vacuum hose with non-return valve and pressure sensor – G608” according to the Elsa Repair Manual, Elsa >> Brake System >> 47 Hydraulic Components >> Vacuum System.

1 天前 · Check the vacuum hose, sensor G608, connectors, seals and valves for possible damage. Check for leaks according to ELSA. Check for small cracks in the vacuum hose or in the connection points between check valves. Replace as needed.

2018年6月19日 · With the engine idling, the G608-Vacuum Sensor should be around [-800 to -950mbar] providing there is a decent amount of vacuum at the brake booster. - The value should change when the pressure (positive or negative) changes.

2023年1月14日 · Booked it into my local garage who diagnosed the G608 vac sensor on the servo to be faulty. After they played around with it the fault disappeared and we thought it was due to the hot we...

This condition occurs due to an incorrect sampling rate between the ECM and the G608 Vacuum Sensor. The symptom as described will store the fault 03366 in the Brake Electronics Fault Memory. This fault will cause the Brake Warning Light to display in the instrument cluster. DO NOT replace any parts for this condition.

2020年9月7日 · Just heard back from the dealer: it was a brake booster sensor (they stated G608 but I haven't found it in the parts list for our cars so think it is actually this one). They told me that they needed to perform an alignment afterwards. Out of warranty, I am pretty sure it would have been a pretty costly repair.

Normally, a vacuum of 600 to 950 mbar is reached. Depending on the parking position (slope) or the user behavior the vehicle is parked with a small vacuum. Within 12 hours the vacuum may drop by up to 400 mbar. Replace the "vacuum hose with non-return valve and pressure sensor - G608" according to the parts catalog. Hide 🔍 ? Search for

2021年7月3日 · Fix the sensor (check wiring, connections and so on). Sometimes I really wonder how people expect help if information like that is hidden in the first place... the failure code points out a problem with the sensor, so why do you want to update software or coding if everything is original? I don't get it.