2023年3月10日 · Vehicle speed: 39 km/h. Coolant temperature: -40 °C. Intake air temperature: 13 °C.

00522 - Engine Coolant Temp. Sensor (G62): Break in wiring / short circuit to positive Possible Symptoms. Difficulties with starting a cold engine. Starting the engine when engine is warmish or warm, idle rpm immediately is 1200 - 3000 rpm. RPM at idle is irregular. With all engine temperatures seldom idle rpm will vary between 900 - 1000 rpm.

2014年11月19日 · The G62 sensor is positioned at the back left hand side of the engine, as shown with the red arrow in the picture above. You can see the wiring harness going into the temperature sender in the two pictures above.

Engine Coolant Temperature Sensor (G62) faulty; Possible Solutions. Check wiring and connections; Check / Replace Engine Coolant Temperature Sensor (G62) Special Notes. In many cars between MY 1995-2002 the G2/G62 had a bad reputation for failing often. The original G2/G62 sensor is black and the improved replacements are green.

2014年1月31日 · When the engine is warming up - say within the first ten minutes... or nearer about five.... as the coolant temperature gets to about 60°C, the coolant temperature gauge suddenly behaves erratically - and often drops completely to zero for a few seconds, and then recovers. Usuall twice When the engine is fully warm it sits rock steady at 90°C.

2009年11月28日 · From Bentley, the G62 (Engine Coolant Temperature (ECT)) sensor test procedure is as follows: Allow the engine to cool to room temp (68F/20C) Disconnect ECT sensor from harness connector

Sensor (G62) P0118 - 000 - Signal too High Freeze Frame: RPM: 840 /min Torque: 72.0 Nm Speed: 0.0 km/h Load: 0.0 % Voltage: 13.98 V Bin.

2014年10月19日 · Hi, I ran AutoScan which discovered failure with the G62 sensor. I refitted a new original sensor original from VAG, cleared all DTC's, but there is stil...

2003年6月10日 · Sensor (G62): Signal too High. Had a friend pull the code from our beloved Passat and it seems we may have a faulty engine coolant temp sensor. If anyone has any tips for it's replacement, including p/n I would greatly appreciate it.

2011年11月23日 · Now, there is an easy way to replace the G62 Coolant Sensor without flushing out all the antifreeze. You put a few folded towels under the sensor, pull out the old sensor and insert the new G62 Coolant Sensor. Before doing this, make sure that the new sensor is ready with a new O Ring on it.