Accelerator Position Sensor faults can be caused by issues with the Oxygen Sensor (s) and it's wiring. Please verify this BEFORE replacing the ECM or Accelerator Pedal. Accelerator Pedal …

2020年5月28日 · I have been struggling with this fault code on my 2008 Audi S4. It comes on and off, mostly on. I have searched the forum and have seen some post/threads but no clear …

2009年3月26日 · DTC: 18047 - Accelerator Pedal Pos. Sensor 1/2 (G79/G185): Implausible Signal? Pulled ECU out, box was dry, blew out connectors anyway, pulled apart and blew out …

2003年10月6日 · S4 / RS4 (B5 Platform) Discussion - DTC: 18047 - Accelerator Pedal Pos. Sensor 1/2 (G79/G185): Implausible Signal? - Recently, when I accelerate full throttle with my …

2016年4月3日 · Use the Measuring Value Block group [030] to view these two sensors, field 1 (G79) and field 2 (G185). These values must increase or decrease incrementally when the …

Accelerator Position Sensor faults can be caused by issues with the Oxygen Sensor (s) and it's wiring. Please verify this BEFORE replacing the ECM or Accelerator Pedal. Accelerator Pedal …

2012年3月31日 · There are 2 sensors in the accelerator pedal, both should increase in the same direction as the accelerator is pressed but they have different scales. This means one counts …

2009年12月14日 · A local Audi specialist store used Vag-Com tool to get the DTC code 18047 Throttle position sensor (G79/G185) implausible signal. They used the software to do the …

1 16610/P0226 - Throttle Pedal Position Sensor (G79): Implausible Signal 1.1 Possible Symptoms 1.2 Possible Causes 1.3 Possible Solutions 1.4 Special Notes

Today the car went into limp mode with warning triangle light and flashing coil light. Turn it off and restart and the car behaved fine again for a short while and then did it again. I cleared the …