Zip file containing all the forms related to Engineering Recommendation G99 (Connection of generation >3.68kW) from A1.1 through to D1 and Standard Application Form (SAF). About ENA Our members

Types of Power Generating Module are defined in Engineering Recommendation G99 and repeated below: Type A: A Power Generating Module with a Connection Point below 110 kV and a Registered Capacity (ie rating) of 0.8 kW or greater but less than 1 MW. Type B: A Power Generating Module with a Connection Point below 110 kV and Registered Capacity of

Registered Capacity - is the Active Power output when the generating unit or PGM is producing maximum output and operating at the required lowest power factor – as per the formal G98/G99 definition. Ensure all fields regarding manufacturer and device information are filled and the declaration is signed.

Engineering Recommendation G99/NI Issue 1 – Amendment 1 7 December 2023 Requirements for the connection of generation equipment in parallel with public distribution networks in Northern Ireland on or after 27 April 2019

G98/G99 Generator requirement documents Find the different applications, commissioning forms and support guides on this page.

Engineering Recommendation (EREC) G99 covers the requirements for the connection of generation equipment in parallel with public distribution networks and is a legal requirement for certain generators connecting on or after 27 April 2019. …

Engineering Recommendation G99 Issue 1 – Amendment 8 1 September 2021 Requirements for the connection of generation equipment in parallel with public distribution networks on or after 27 April 2019

In general, for generators in excess of 16A per phase (3.68kW), the connection must comply with Engineering Recommendation G99, published by the Electricity Networks Association. The G99 guides can be found by clicking the link below:

2020年3月20日 · Anyone who wants a network connection that fits into Type A, B C or D above must fill in a G99 Standard Application Form (SAF)– or get an expert, such as Roadnight Taylor, to do it for them – as the first stage in creating a G99 compliant project.

EREC G99 – Standard Application Form, SAF Used when wanting to connect a Power Generating Module greater than 16 Amps per phase. Changes include:- •Alignment of terminology with G99 (PGM, GU etc) •Inclusion of storage data •New technical data •Voltage control data •Frequency response droop settings •Type C & D only: