The LineBacker ® gasket is constructed from G10 glass-reinforced epoxy (GRE). The LineBacker ® contains a rectangular sealing element referred to as a “quad-ring.” The quad-ring is used in combination with a unique, engineered groove design and together they provide an effective sealing element that also requires less bolt load than a ...

The Insolion GRE gasket consists of a G10 glass reinforced (GRE) carrier with two modified PTFE sealing faces. Proprietary machining of the carrier allows correct location of the sealing faces, with the depth / profile designed to achieve correct compression and groove fill.

The g10 with SS 316L core VCS flange insulation gasket kit is often a "Very Critical Service" gasket made for electrical flange heat retaining material and common sealing applications. That gasket is acceptable for use in raised-face, flat-face as well as RTJ flanges in all pressure classes which include API 15,000 psi support.

The Insolion GRE gasket consists of a G10 glass reinforced (GRE) carrier with two modified PTFE sealing faces. Isolation gaskets are challenged to fulfil both sealing and isolating roles at a wide range of pressures and temperatures.

Fitting guide for Insolion G10/G11/GRE flange isolation kits. James Walker product fitting guides are compiled from the detailed knowledge and experience of our product and application engineering teams.

ISOFLEXTM-LT is a flange isolation gasket made of NEMA grade glass-reinforced epoxy (GRE) with Flexpro® (kammprofile) style serrations faced with Corriculite®. Suitable for use in applications involving hot and cold water, steam, oils, fuels, gases and …

典型的带不锈钢核心的G10绝缘垫片可能每小时泄漏3cc氦气，而EVOLUTION的泄漏率平均每10,000年仅为1cc！ 由于EVOLUTION的极高密封性，EVOLUTION是输送温室气体（甲烷、卤素和二氧化碳）、氢气和LNG应用的可行密封解决方案。

Insulating sleeves are available in Polyethylene, Mylar, G10, Phenolic or Nomex. They are designed to be easily inserted in the bolt hole, leaving ample room for the bolt even when the bolt holes are misaligned. The rTJ is an oval phenolic gasket designed to work specifically with rTJ grooved flanges.

ISOFLEX™-FS by Flexitallic® is a FIRE SAFE flange isolation gasket made with NEMA grade glass-reinforced epoxy (GRE) and metallic Flexpro® seals. ISOFLEX™-FS flange isolation gasket employs industry proven metallic Flexpro® seal design, with Flexitallic proprietary corrosion mitigating sealing material, Corriculite®.

Type E gaskets are available in G10, G11, G7, Neoprene or Nitrile Faced Phenolic, Plain Phenolic, and G10 with stainless steel 316 core or Non-asbestos materials. Type F Flange insulation Gasket Kit is made to physically fit the raised face component of flanges.