The GRP spacer is a profiled rod made of glass-fibre reinforced plastic (GRP). The spacer guarantees dimensionally accurate production of core-insulated double walls. Due to the profiling, the bar achieves high pull-out and punch-through resistances.

Composite anchors with glass-fiber-reinforced plastics (GRP) and with virtually no thermal conductivity are capable of eliminating numerous possible thermal bridges. In addition, spacers are frequently used to ensure dimensional uniformity of wall thickness.

Spacer bar made of glass-fibre reinforced plastic (GRP), Ø16 mm, UV stabilised, light grey colour, permanent temperature range -50 to +100 °C. The material factor k m = 0.7 is used to determine the separation distance (length of spacer bar). 1 m of spacer bar is …

2020年12月14日 · In this research, an electrically-polarized graphene-polylactic acid (E-GRP) spacer is introduced for the first time by a novel fabrication method, which consists of 3D printing followed by electrical polarization under a high voltage electric field (1.5 kV/cm).

The GRP spacer is a profiled rod made of glass-fibre reinforced plastic (GRP). The spacer guarantees dimensionally accurate production of core-insulated double walls.

few ther-mal bridges as possible and the optimisation of the insula-tion values of the walls. A large number of possible thermal bridges can be eliminated with shear onnectors made of glass fibre reinforced plastic (GRP), which is barely ther-mally conductive. Spacers are frequ

This air-termination rod, typically encased in a concrete base with a mounting wedge, is key in maintaining the separation distance required by EN 62305-3. The bar is fabricated from UV …

GRP Casing Spacer 4 pipes – UV-light curing For extreme small annular spaces which do not allow skid heights and usage of standard plastic casing spacers, or in case of an extreme rough and abrasive inner surface of the casing pipe, a casing spacer wrapped on the pipe from the Fibercoat Ultra tape material is the ideal, safe and easy solution.

TruPlas™ is a rigid, glass-reinforced thermoplastic (GRP) spacer system which incorporates a proven vapour barrier with advanced acrylic which strengthens under heat. Units are manufactured using conventional methods and offer a traditional appearance with all the warm edge benefits as well as increased stability and strength.

The spacers are notched at each bearing bar so the bars are both mechanically locked and chemically bonded to the web of each bearing bar. This separates and afixes bearing bars firmly in position and distributes concealed load to adjacent bars.