2011年11月27日 · Glide Pro front mount I decided to replace a new OEM front motor mount with a Glide Pro mount for my 2003 Road King. After reading all of the reviews I was in hopes of reducing the idle and highway vibration in the handle bars and floor boards. I replaced the new OEM mount with FM-1008 Glide Pro front motor mount.

4 天之前 · Glide pro front motor mount review Started by Cozz, June 29, 2019, 01:16:15 PM Previous topic - Next topic 0 Members and 1 Guest are viewing this topic.

2009年11月19日 · Just a review of the Glide Pro front Motor Mount He Offers just the front motor mount. Top Quality Mount and Hardware. I was amazed at how smooth the Idle is. I have used the Velvet Ride on previous bikes and the Glide Pro does a much better job. When I ordered I called and Jake the owner...

2024年8月4日 · Glide Pro is too stiff. Always has been, probably always will be. And the softer you go on the compound the sooner they fail. Far and away, the best mount for the three point Evo setups is the oem style mount. Don't buy the chaep ones off of ebay or amazon, they are not the same. Buy the one Drag sells.

2016年1月2日 · Glide pro goes to great detail about that and the easy way to check is to undo the nut on the bottom of the center bolt and then see if the bolt slides up and down easily in the sleeve. Any binding indicates the mount is not properly centered and will transfer excessive vibration into the frame.

2010年6月13日 · +1 on the glide pro mount. I bought the front motor mount and swing arm mount kit. I havnt installed the swing arm mount yet, but just doing the front mount made a huge difference on my 02 RK

2012年5月3日 · 05 style cleve blocks and a glide pro suspension and motor mount kit,is the way to really get them dialed in. upgrade the clev blocks/swing arm,add the glide pro kit,then line the wheels up as per Jakes video. (glide pro website)

2009年11月14日 · I have a 2008 FLHX with STA-BO II bushing kit on it right now and I am considering adding a Progressive tour link for added protection, or scrapping both for the Glide Pro bushing system. Just wanted to get everyone's two cents! Thanks in advance.

2021年2月19日 · True. I might add Glide-Pro recommends loose installing the front mount then starting the motor and running it for a couple of minutes to allow everything to find its’ place, (Alignment) then shutting down and torquing the fasteners in place. Easy on the center bolt.

2012年10月24日 · Had a broken motor mount on my 2000 FLHP. Had the dealer replace it with the "D" mount. The increase in vibraton at speed was rediculous as was the shake from 1200-1800 rpm. Called and ordered the Glide Pro Mount and installed per their video. The bike is excellent now. Very little vibes, as...