2009年3月6日 · hi im new to the site but im repairing my h22 head and ill be putting it on my accor 96 if all goes well ill be posting it for everyone to know what to plug or what not to im also getting pistons for it because the f22 is a 9.0:1 c/r and the h22 is 10.0:1 or you could also deck the head but i'm not doing that cause ill be boosting it up.

2005年1月22日 · That parts list looks like it's well over $500 (mostly the cost of the H22 head), and that's assuming that you already have the F23 block. Also, you sorta mentioned the exhaust manifold in the head cost, but typically, if you buy an H22 …

2009年1月15日 · obd1 and obd2 electronics aren't compatible as far as i know. you'd have to get a vtec head, distributor, and p13 ecu from an obd1 prelude. i'm not sure how well the frankenstine motor would run, i've heard mixed things about it. some people say its not reliable, but i've also heard people say they've had no problems with it. if youre just looking for vtec i'd say just do an h22 engine swap ...

2007年11月28日 · ok, i know there is a lot of threads about h22 swaps. and i know if i want to do the head i should do the whole engine. but i got the H22 head for free, and i do not know if it will fit on easily on the count since it will be a SOHC block …

2006年12月30日 · The H22 Vtec has about 200hp stock. The H23 has a longer stroke, but the cylinders are the same as the H22 which is why you can bolt on the H22 head. The H22 has a higher compression ratio because of the pistons, and the combustion chamber.

2003年2月22日 · Head Swap A buddy of mine did this swap and blew the first one, and said that the very first thing that you HAVE TO DO is...balance the crank and knife the crank. I also am doing the H22 head-H23 Block in my 92 CB7 Lx. And using the CB7 tranny and BOOSTING the hell out of it-25-35psi. This also comes with a hefty price.

2011年8月30日 · H22 headers, h22 exahust manifold gasket (h23 doesn't line up) And with a 10mm bolt get the oil restrictor out (its in the middle/back of the block) h22 distributor h22 complete head (vtec solenoid, intake manifold, cams, cams gears, injectors, and throttle body, make sure it has all the sensors) *I'm not sure if the h23 manifold fits on the ...

2003年5月18日 · doesnt matter what head year it is..as long as its all the same series..so you'll be fine..you'll also need to use the h22 crank/pulley, timing belt, maybe water pump as well. might need the h22 intake manifold also. get the oil line tapped into the oil pressure sensor. then you can splice the vtec from the head onto your wireharness that way it wont be such a hassle redoing the entire wire ...

2004年11月21日 · I have a h22/h23 frankenstein engine, havent started it yet since i'm still working on the problems with the turbo stuff but i can definately tell you its not worth it. but if you have the h22 head and are planning to do high compression i do have the perfect cams for you. i have crower stage 2a's that i have installed but never ran the car since i changed to a turbo and turbo cams. the cams ...

2008年6月30日 · Hey, im new to this forum, i have a 1991 Accord with a F22 SOHC non VTEC. Im thinking about dropping a H22 in but would a H22 head fit on my F22A1 with...