Single iLO device RBSU is the recommended method to set up a single iLO device initially. After the iLO device has been set up, it should be available on the network; and subsequent configuration and management can be done through the web browser or a script. RBSU is available every time the server is booted and may be run remotely using the iLO

HP Recommended SMART Array Rebuilding/Restoring Techniques scope of this paper The purpose of this document is to provide instructions for replacing hard drives in hp systems,

Enter XD -reset to reset the iLO MP (only necessary if you are connected through a serial port). Step 15. After the iLO MP resets, log in to the iLO MP again. Enter the iLO MP command mode (enter CM at the MP: prompt). Step 16. At the MP:CM> prompt, enter LS to confirm the new LAN settings. Step 17.

HPE iLO (Firmware HPE iLO4 2.3) 4GB NAND NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in the iLO QuickSpecs. Memory € Type: HPE SmartMemory € DDR4 Registered (RDIMM) or Load Reduced (LRDIMM) € DIMM Slots Available 24 (12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per channel ...

This guide provides information about configuring, updating, and operating HPE ProLiant Gen8 and Gen9 servers and HPE Synergy compute modules by using the HPE iLO 4 firmware. This document is intended for system administrators, Hewlett Packard Enterprise representatives, and Hewlett Packard Enterprise Authorized Channel Partners who are involved in configuring and …

https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo5-firware-update-fails-quot-the-file-siganture-is-invalid/m-p/7111311#M173120 <P>Just in case that it helps ...

2009年5月11日 · The only indication that I can see is that the System Health status has a yellow warning sign next to it and it says the status is degraded. I just reset the iLO controller for the bl460 and the status got changed back to ok. Is it common for iLO to get confused like that?

reconfigure iLO and RILOE II from within the Windows and Linux operating systems without requiring a reboot of the server operating system. The utility runs in a command line mode, and must be executed from an operating system command line. Requirements The HPONCFG configuration utility is for use on ProLiant servers containing iLO

All iLO functions are available through the server LAN and the local RS-232 and remote RS-232 ports. Access to local and remote ports, telnet, and secure shell (SSH) is through the iLO text interface, while Web access is through a graphical user interface (GUI). iLO was introduced into most Integrity Entry Class servers in late 2004.

2010年10月12日 · I am trying to upgrade ILO firmware which is at version 1.81 at the minute for one of my BL685C. I have installed HP insight remote support and pushed out these two updates, 1. HP iLO Management Channel Interface Driver for Microsoft 1.11.0.0 ----- 1.14.0.0 2. HP ProLiant iLO 2 Management Controller Driver for Windows Server 2003 x64 Editions