The unit of hardness given by the test is known as the Vickers Pyramid Number (HV) or Diamond Pyramid Hardness (DPH). The hardness number can be converted into units of pascals, but …

HV是表示维氏硬度的符号，其单位是 \left[ kgf/mm^{2} \right]，表达式是： HV=\frac{F}{A}=\frac{F}{\frac{d^{2}}{2sin(\frac{136°}{2})}}\approx1.8554\frac{F}{d^{2}}\left[kgf/mm^{2} …

维氏硬度 (HV)是以一定的载荷和相对面夹角为136°的方锥形金刚石压入器压入材料表面，保持规定时间后，测量压痕对角线长度，用载荷值除以材料压痕凹坑的表面积的值，单位为N/mm2。

Vickers hardness (e.g. HV/30) value should normally be expressed as a number only (without the units kgf/mm 2). Rigorous application of SI is a problem. Most Vickers hardness testing …

Vickers [HV] is a common unit for listing carbide grades ’ hardness and other hard-cutting materials such as Ceramics, CBN, and PCD. The test is done by measuring the surface area …

The Vickers number (HV) is calculated using the following formula: HV = 1.854 (F / D2), with F being the applied load (measured in kilograms-force) and D2 the area of the indentation …

Steel hardness conversion chart: Shows equivalents using Brinell, Rockwell B and C and Vickers scales. These values are approximate and for guidance only. Also hardness ranges for heat …

The required force is directly related to the surface area of the indenter, and it is measured in units of kgf, which is represented as HV (Vickers Hardness). Since Vickers hardness is based on …

Hardness is a measure of the resistance of a material to plastic deformation induced by applied forces. Some materials (e.g. metals, ceramics) are harder than others (e.g. plastics, wood). …

2024年10月3日 · 本计算器可以快速准确地进行硬度转换，是材料科学与工程专业人员的宝贵工具。