The shaded number indicates the digit that can be adjusted. Using the right or left arrow you can select a different digit. Using the up and down arrows, adjust the selected number on the SC200 display until the multimeter measures 20.00 mA. When the multimeter reads 20.00 mA, press the enter key on the SC200 to save this setting.

In the SD card directory, open the HACH folder. Select the Logs folder. Select a device folder. The event and data log files in the folder are shown. To view XML data log files: Make sure the HachDatalog.xsl style sheet exists in the device folder. Open the Excel application. Go to File, Open. Select the data log file.

The following are the basic steps for configuring the Alarm Relays on the SC200 controller: To configure the Alarm Relays: From the HOME screen, select MENU Select SC200 SETUP; Select RELAY SETUP; Select from: RELAY A; RELAY B; RELAY C; RELAY D; Select SOURCE; Select the sensor (by name or serial number) that this alarm should represent, and ...

For sc200: 1. Output Cal 4 mA default is approximately +10500 ... Hach Small Business Supplier Program ...

The process for setting up and scaling the 4-20 mA outputs on the sc200 controller is as follows: Install probe on controller with "Scan Devices" within "Test/Maint" from the main menu. Proceed to "sc200 Setup" from the main menu. Choose "Output Setup" Choose the mA output that the SCADA is physically wired to (1 or 2)

2023年7月4日 · Software Update Procedure for sc200 Controller There are two ways to update the software for an sc200 controller. The one way is by using an SD card inserted directly into the controller and the second is using DataCom and a PC. First the latest version of the software for the sc200 Controller should be downloaded: sc200 Controller Software

In the SD card directory, open the HACH folder. 3. Select the Logs folder. 4. Select a device folder. The event and data log files in the folder are shown. 5. To view XML data log files: a. Make sure the HachDatalog.xsl style sheet exists in the device folder. b. Open the Excel application. c. Go to File, Open. d. Select the data log file. e.

SD cards can be used with the sc200. Answer. SD cards up to 32 GB can be used. ... ©2024 Hach All rights ...

For the SC200 Controller, save the contents of the folder to the root directory of the SD card. Many of the sensors have an SD card image on the website. This image is specific to the SC200 file structure.NOTE: when using an SD card image it is best to save the file to a computer, unzip it and then transfer the entire HACH folder to the SD card.

Please note the below icons will be shown on both the main display of the SC200 and in the Diagnostics menu. Using the same icons in both locations can help a user understand what impact that diagnostic item has on the sensor and how to clear it.