2016年7月17日 · Hello, today I'll show you how to do the Copper Mod on a Hakko 907 Clone soldering iron. It may as well work for similar brands as the Yihua 936 soldering st...

2025年2月6日 · I wanted to pick up a hakko fx 888d but I am not sure if the handle is too big for the OLED instinct install. I know there are clone stations that are recommended, but is this …

2012年4月23日 · Is it possible (and by that I mean 'how is it possible') to rewire the transformer board of a 110V Hakko FX-888 to run off 230V mains? (transformer board can be seen at …

2020年8月8日 · A fun project with reverse engineering, PCB, and mechanical (CAD) for the housing.

2024年1月5日 · Originally, my HAKKO FX-901 soldering iron used AA batteries, but that made it heavy and slow to heat up - so I decided to upgrade it by modding it to accept a USB-C Power …

2014年12月6日 · Heats up from cold to 450degC in about 30sec and seems to handle large thermal loads without issue. So doing it this way ended up being a lot cheaper than buying the …

2019年7月27日 · 大家都知道，进口烙铁中日本白光在中国的知名度最高，畅销多年的936焊台可谓经典。但是有些白光焊台知识，即使多年的白光玩家都未必清楚。1、比如早期白色外壳 …

2021年10月9日 · I've been using a Hakko 936 station (the popular square black model everyone used before it was replaced by the rounded colorful style) for almost 15 years and I'm only on …

Here's a fairly simple-to-install mod which will add a green LED to the right hand side of the front panel on the 936. This LED will be illuminated any time power is applied to the soldering …

The tip grounding mod is two joints, or one wire, and the 3.1 version has a properly grounded chassis that can take a banana plug for grounding straps. Whatever you choose, you won't be …