2010年9月15日 · The microstructure, crystallographic features, and the effective grain size of different regions in the HAZ were examined by transmission electron microscopy (TEM) and electron back scattering diffraction (EBSD) analysis.

The microstructures in the HAZ and other regions are examined using SEM, metallographic images, and electron backscatter diffraction (EBSD). Next, the FCGRs for WAAM, HAZ, cross-weld zone, and BM specimens are compared.

2015年5月17日 · In order to get better understanding of the mechanism of cleavage fracture in the heat affected zone (HAZ) of X100 pipeline steel, secondary microcracks underneath the brittle fracture surface of a Charpy impacted sample with the notch located in the HAZ were characterized using electron backscattered diffraction.

2024年11月17日 · Notably, the heat-affected zone (HAZ) in DSS 2205 showed random texture due to ferritization and grain coarsening. EBSD analysis at the interfaces revealed epitaxial grain growth from partially melted grains while energy-dispersive X-ray maps disclosed complex interdendritic particles in the weld metal (WM).

This paper discussed the variation of microstructure at different locations of heat affected zone (HAZ) of a high strength steel welded joint using an optical microscope and an electron backscattered diffraction (EBSD) system.

2023年5月5日 · Electron back scattered diffraction (EBSD) is used to analyze microstructural development and texture evolution in alloy 2507 and weldments. The EBSD scans were performed with an accelerating voltage of 18 kV and a working distance of 16 mm with a step size of 0.25 microns.

2018年7月16日 · 利用光学显微镜（om）和电子背衍射散射（ebsd）分析方法，研究了不同激光偏移量及接头不同位置对界面金属间化合物（imc）组织形态、物相组成及厚度的影响。

In this study, laser-cladded AISI 420 martensitic stainless steel was characterized using the Electron Backscatter Diffraction (EBSD) technique to analyze the substructure of martensite in the selected zones such as the bead zone (BZ), the dilution zone (DZ), and the interface with the heat affected zone (HAZ) of the bead.

The research has identified the target microstructure with optimum density and dispersion of crystallographic high angle boundaries required to obtain maximum toughness at low temperature in the HAZ region in single-pass welding associated with a low temperature window of transformation in higher niobium bearing higher grade linepipe steels.

2023年6月20日 · EBSD results validated that the LSP process induced high-density dislocations and promoted grain refinement in the substrate, HAZ, and cladding zone, thus effectively modulating the...