Homemade Boom Pole - Green Tractor Talk
2016 JD 1025R, 60D Deck, H120 Loader 2011 JD X748, 54C Deck, 54" blade, Power Flow, 3pt hitch
Boom / Lift pole (with pics) for around $100 - TractorByNet
2012年4月7日 · I have a suggestion for you, and this is similar to rear tractor boom poles. Weld a 6 in extension on top of the connection point. and weld some rebar from the start of the boom, across the extension, to the end of the boom. No holes in boom unless at the end, to late. Weakest point is at the holes in boom.
Heres my home-made boom pole - TractorByNet
2011年3月13日 · I thought a boom pole/crane would be handy to lift suplies onto the roof, pick stuff up, etc. Aside from the skid steer plate (bought it new), this was all scrap and stuff laying around the shop. I painted it today - pictures were before painting. Still need to weld an attachment point on the end of the pole.
Homemade fel mounted boom pole, need pics - TractorByNet
2012年3月20日 · We made a boom pole for a 580C backhoe one time out of a piece of pipe and a piece of plate. Welded the plate to the end of the pipe and bolted it to the bottom of the bucket. Then took chain binders to each corner of the bucket for lateral bracing.
Boom Pole, homemade and mechanics, geometry - TractorByNet
2005年7月10日 · I need this because my trailer will only hold the tractor and one implement (99% of the time). By brother in law had this homemade sucker. huge, heavy and I had to have help to put it on. But I noticed the geometry is different that the new ones. On this one the main pole attaches to the top link position. The pivots as the lift arms move up ...
Homemade telescoping boom pole - TractorByNet
2012年12月4日 · The top pole is mounted directly to the tractor top link mount. On the bottom of the pole, there is pin where the bottom triangle is connected. As the 3 point arms are lifted, the pole pivots on the pin and will exaggerate the lifting height of the pole. It is a simple lever and fulcrum design. The main pole is made from 2-7/8 oil field pipe.
Building a 3 point boom pole? - TractorByNet
2010年4月25日 · Then welded the boom pole just below the top link, with ~3'-4' pieces coming up from the cross piece and back to the boom pole as support. I ran a 'stressed' rod across the boom, resting it across a mid-block and welding one end. Then I clamped it down (attempting to 'tighten' it up) at the other end.
Homemade boom pole rating - Green Tractor Talk
2023年4月8日 · I like the earlier ideas, although I agree the boom may handle as much as the X739 can lift anyway. (You can only place so much ballast near the front axle.) You could weld a vertical tab on the tractor side of the 3-point pin and run either a steel rod or a cable with turnbuckle to the lifting end. That would greatly reduce the bending force.
Looking to build a skid steer boom pole - TractorByNet
2005年3月21日 · This was all built on a 3/8" thick skid steer adapter plate. Tractor will lift at least 3000 just off the ground and I have picked 1200lbs at the end of the pole. Tractor will not curl it but it will lift with the main cyls. With the bracing nothing flexes at all. I …
Loader Has anyone made a boom pole for their front loader?
2014年1月16日 · Industrial Toys is pretty much right on for a small scale operation. Many years ago I set the trusses for a 60 ft long building using a simple boom pole and a Ford Jubilee tractor. Basically a triangle made from 2.5'' dia. pipe or whatever appropriate. The smaller side just sits in the bucket and make it whatever length will safely work.