Filling the shock with N2 by Needle - ThumperTalk
2021年5月31日 · When you fill a shock while using a Race Tech Nitrogen filler tool on a Shock wwitha Schrader valve......You can watch the needle on the Filler Gauge go up in Psi and can control the amount of Nitrogen going into the shock by simply using the valve on the filler tool. Onve the desired psi is met.
FOX shock IFP Air fill with shock pump & nitrogen needle
In this video I go over filling fox shocks IFP Chambers, that use air valve pellets to seal the IFP damper chamber, with a shock pump and nitrogen needle. Ye...
How to check, adjust and fill the nitrogen in your shocks
2021年2月8日 · FOX shocks should be left at the factory setting of 200 psi of nitrogen. The nitrogen charge in the shock is to pressurize the internal floating piston (IFP) and avoid cavitation. Tuning should be performed through spring rates or shock valving changes and not with changes in nitrogen pressure.
Nitrogen charging a WP shock - Motorcycle Suspension - ThumperTalk
2023年7月21日 · For doing more shocks it is easier to use the nitrogen charging bolts and needle, or the race tech nitrogen charging tool. This is basically what I use with the RT filling bolt and needle - remove the hose from the handle and install a 1/4" NPT ball air chuck and close nipple.
DIY: Fox shock IFP fill - Blogger
2020年8月15日 · Fox use a special nitrogen adapter to fill the IFP, which stands for Internal Floating Piston. The IFP is used to separate the damper oil from the air or nitrogen in the damper. Pressure needs to be released and refilled to service the damper and change the oil, so the fill tool is necessary even for a basic damper oil change.
Refilling Nitrogen Shocks - YouTube
2020年7月25日 · If you have nitrogen filled shocks, you should be checking them every 6-12 mont... Running higher end shocks usually means higher level of maintenance and care.
How to inflate shocks with Power Tank Nitrogen Shock Fill Kit
This is a quick video showing you how to fill your shocks using a Power Tank Shock Inflator (SIG-5600) and a 72ci N2 bottle. Both items are supplied in the P...
Fox Shock nitrogen Needle Fill Tool With Schrader Valve
These are needle style fill tool adapters from Schmidty Racing Suspensions. They are designed to thread the schrader valve into a no-loss chuck and then apply / recharge nitrogen into shocks utilizing the self-sealing rubber plug / pellets (used in many shocks including Fox, Yamaha, KYB, Polaris RZR, Arctic Cat, Ohlins, Ford Raptor, and ...
- 评论数: 24
Fox Shock Nitrogen Needle Fill Tool - Schmidty Racing
This is a needle style nitrogen fill tool from Schmidty Racing Suspensions to apply the nitrogen into shocks utilizing the self sealing rubber plug/pellets that are used in many different Fox Podium shocks. Comparable to Fox part 802-02-001-A.
- 评论数: 15
DIY Nitrogen Fill Tool - Motorcycle Suspension - ThumperTalk
2015年3月21日 · I recently built me a Nitrogen Fill tool setup so I could service my own shocks. I wasn't thrilled with anything out there, and figured I could piece something to my satisfaction cheaper than what I could get commercially; so here it is.