2011年10月11日 · If it has a grippable head, you can try a vise grip. If not, use a screw extractor. You drill a hole in the center of the screw and insert the extractor and unscrew it from the inside. You need to drill the hole with the correct soze bit associated with the extractor size..

2021年3月10日 · There are two small slotted head screws hodding the plate on. She was able to remove the first one, but the second one will not budge. Unfortunately, after many attempts, she has seriously damaged (but not totally destroyed) the slot on the head of the screw. It is a countersunk flat head, so no way to grab with a plier or other tool.

2021年1月22日 · 3) Remove the "decoration" since it's a decorative plug that covers the allen screw that holds the handle onto the cartridge. You may need a fine screwdriver or a couple of needles to "walk it out" from the recess. 4) There may be shroud holding the cartridge or a circlip, tension ring, etc. Remove that and then pull the cartridge up and out.

2021年8月8日 · Tried using a few different flat head screwdrivers to remove the rusted flat head screw as shown in the attached image, the top screw removes very easily. Can't get the flat head screwdriver to sit into the screw at all so it won't even grab. The screw is unfortunately inside the threads holding the receptacle in place. Any suggestions?

2009年1月20日 · So, if you have a #8 undercut head screw, the head on it will be the same as you'd find on a #6 screw. Similarily, the head on a #10 reduced head screw will be the same as that on a #8 screw. In this way, you can use a larger undercut head screw to repair a stripped hole for the screws in a door hinge, say.

2024年10月19日 · If there is a chunk of the screw exposed, use a vice grip. If there isn’t a chunk of screw exposed, carve the PT until there is- make sure this will be concealed. Fix the hole you stripped with a dowel and exterior grade wood glue. Gasket the mounting plate to the post with Lexel to prevent non treated dowel from rotting.

2017年4月18日 · Hung my doors, and used a 3" wood screw in each hinge center hole to help secure door. Went to take door off hinge to stain and head broke right off. I know the rest of the screw is stuck in the stud, not in the jamb. Only way I can even see to attempt to extract would be to first remove the whole jamb - which I don't want to do. Any other ideas?

2021年1月10日 · I'm starting a remodel on our small shower stall, and the set screw on the shower handle was stripped. I was unable to get it with an allen wrench. The guys at the local home improvement store recommended drilling into it. I did so, and the head of the set screw broke off. When I continued trying to drill, I broke two drill bits.

2020年11月26日 · If a screw has a countersunk head, then it's meant to countersink. If that is the case, then one of two things is going to be true. Either it's intended to countersink no farther than flush with the head rim (not the full distance of the hex head, or if it's designed to countersink an arbitrary amount than the rim will be wide enough to ...

2023年5月27日 · I actually called a plumber and he couldn't figure out how to remove stripped set screw and left without doing much. After he left I removed another body shower and stripped another screw. The screw doesn't come out from metal cover as it has a stopper. I was able to put the second one back using a rubber band.