We had a load of fill delivered to level out a low spot in the yard and now it’s time to spread it. We always use what we have available on our random projects and this time is no different! ATV,...

2019年12月31日 · I've been thinking about an ATV trailer for some time. I picked up wheels and tires and spindles in October. I spent a good few hours drawing up some napkin drawings and picked up most of the needed metal last week. So.... Today was the day. I headed to the shop and started the fab. My ideas put to paper.

2014年7月22日 · I was thinking of maybe cutting a i beam in half at a 45 degree angle then welding them together to make a V shape and seeing if that would help pull gravel to the centre better. Any ideas or pictured would be appreciated Thanks

2024年9月18日 · ATV & RV Accessories. I design and build accessories for ATVs and RVs: ATV Walking Beam Assembly; RV Step Buddy; I also carry a variety of supplies and parts for ATV pull behind trailers, plus fabrication supplies such as steel. If you are looking for something specific, give me a call. I may be able to supply, or even build, what you need.

2022年8月15日 · Adding a deck to my home, I got my hands on a 50 foot long I-beam for the outside support. Didn't have a trailer long enough for it so I decided I would just use my Outty XMR 1000 and a small trailer.

Gooseneck Xtreme Sports are available in tandem or triple axle, lengths up to 52 feet, with payloads up to 8100 pounds. Standard features include 8″ I-beam chassis, beavertail, fully finished interior, torsion axles, radial tires, LED lights, and our famous front ramp.

Independent double A-arm front suspension (6.7 inches of wheel travel) and the fully independent, A-arm/I-beam rear suspension (7.7 inches of wheel travel) use four large diameter, gas-charged shock absorbers with five-way spring preload adjustment.

2014年10月9日 · I built a walking beam ATV trailer and just used new rubber rear spring inserts from a 1990 Dodge 3/4 ton pickup for the walking beam pivots. The inserts have metal inside and outside sleeves. I found a piece of pipe that just fit over the outside sleeve and welded it to the frame work and used a bolt for the inside.

2012年3月7日 · A friend of mine had a piece of I beam and then a section of chain link fence attached to the back of the I beam and then a 2X8 on the other end of the chain link, it worked pretty good, but he was pulling it with a truck.

2014年12月10日 · In the U.S., building codes do not allow you to penetrate (drill through) a metal or wood supporting beam. Nevertheless, using the hole to support an atv should be no problem at all. If you ever sell your house though, remove the hook and put a bolt through the hole.