NXP offers a vast portfolio of I2C logic products, I2C Bus controller and bridge IC, for communication and protocol conversion supporting many system

SC18IM704 is designed to serve as an interface between the standard UART port of a microcontroller or microprocessor and the serial I²C-bus; this allows the microcontroller or microprocessor to communicate directly with other I²C-bus devices. SC18IM704 can operate as an I²C-bus controller.

1. 在 Sysconfig 中设置 UART 外设实例、I2C 外设实例和所需器件引脚的引脚输出。 2. 在 SysConfig 中设置 UART 波特率。默认波特率为 9600。 3. 在 SysConfig 中设置 I2C 时钟速度。默认值为 100kHz。 4. 定义桥接器处理的最大 I2C 数据包大小。 5. 定义关键的 UART 标头值（可选 ...

The CAN-I2C bridge can be divided into four independent tasks: receive from I2C, receive from CAN, transmit through CAN, transmit through I2C. Two FIFOs implement bidirectional

Single UART with I²C-Bus/SPI Interface, 64 B of Transmit and Receive FIFOs, IrDA SIR Built-In Support.

The main purpose of the I2C-USB bridge is to test, tune, and debug programs that have an I2C slave interface. This application can also be useful for data acquisition and regulation under PC control. A wide variety of devices can be connected to the PC using this bridge.

SC18IS606 is designed to serve as an interface between a standard I²C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I²C-bus. SC18IS606 operates as an I²C-bus target-transmitter or …

FT201X – Full Speed USB to I2C Bridge. This USB2.0 Full Speed IC offers a compact bridge to I2C devices. The device is an I2C slave, capable of operating up to 3.4MBit/s, with low power consumption (8mA). The FT201X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over an I2C ...

Microchip’s SCSI USB to I2CTM bridge devices provide a USB to I2C bridge. The I2C bridge utilizes SCSI pass-through commands using the Mass Storage Class driver. The internal hub can have e.g., three ports enabled with two exposed externally. This document includes the …

This example demonstrates UART-I2C bridge implementation using PIC microcontroller. The PIC16F15244 MCU acts as I2C host and communicates with multiple I2C clients. Compatible PIC16F152xx family of...