2007年7月5日 · I just replaced my IAC after getting a D15B swap. I am having a Skunk2 throttle body installed in a couple of weeks (I already have the Skunk2 intake manifold installed with the stock TB, the Skunk TB was on B/O forever), which will completely do away with using a FITV.

2022年2月26日 · honda eg hatch playlist link belowhttps://youtube.com/playlist?list=PLGyWs3qsrez-pSjrk59PJ9uNmR5_U6DOWshare ko nadin yung journey ko sa makulit na idling ng ...

2009年9月26日 · Manual ECU will need 5 wire wideband O2 and 2 wire IACV as opposed to 4 wire narrowband O2 and 3 wire IACV. I personally own a 37820-P2J-003 obd2a Manual ECU for my motor but I reckon maintaining the 2b auto ECU would be a quicker/cheaper route.

2010年3月7日 · has anyone here ever removed their IACV and just set the idle mechanically? blocking off the holes and set with the screw and blade stop?

2011年11月14日 · This seems like IACV issue, I have a D15B with Skunk2 intake and TB to which I cannot connect my stock IACV, my car has same problem, It works just fine if I keep the throttle to about 1500 RPM for about 1-2 mins. I did a workaround to temporarily fix this problem by adjusting the Throttle plate to open a little bit more at idle.

2008年3月11日 · I am getting about 33 in the city right now but I think it has to do with my IACV issue that I am working on. The engine came from a CVT model so it has the 3 wire (auto) instead of the 2 wire (manual).

2011年8月11日 · WTK, where is the Idle Air Control Valve(IACV) located D15B. Post by Vin24 » Thu Jun 28, 2012 2:08 am . Guys I hav a Civic 99 with D15B vtech engine i need to know where is the Idle Air Control Valve(IACV) located?? Top. S_2NR TriniTuner 24-7 Posts: 13305 Joined: Sun May 23, 2010 12:11 am.

2009年2月14日 · The ECU does weird things to the idle when it thinks the IACV is bad. Check your wiring, and maybe try plugging in a known-good IACV.

2012年2月22日 · I own a JDM d15 with dual Vtec solenoids. When i bought that car it had an CVT trans which i replaced with an MT 5 speed. After that swap it feels like one of those Vtec wasnt working. So i changed the AT ecu ( p2j-00 ) and replaced it with an MT ecu ( p2j-003). As i plugged the MT ecu i caught an heck engine sign which was code 14 (IACV error).

2019年2月5日 · Idling is stable with AC ON or OFF. Below situation is while AC is off and engine is at operating normal temperature. On a full stop, idling is normal. Kapag nag-shift to 1st gear (2nd, 3rd gear etc) to 1500rpm and then neutral, the idling stays at 1500rpm. Idling will only go back to normal (around 800rpm) on a full stop.