(5) For rigid plastic IBC design types 31H1 and 31H2 and composite IBC design types 31HZ1 and 31HZ2: whichever is the greater of: ( i ) The pressure determined by any one of the following …

Many years now there is consensus among most experts involved in fire protection that a fire in warehouses storing flammable and combustible liquids in composite IBCs are difficult to …

Ammonia solutions may be transported in rigid or composite plastic IBCs (31H1, 31H2 and 31HZ1) that have successfully passed, without leakage or permanent deformation, the …

The hydrostatic pressure test must be conducted for the qualification of all metal, rigid plastic, and composite IBC design types intended to contain solids that are loaded or discharged under …

Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 …

IBC02 IBC PACKING INSTRUCTION IBC02. The following IBCs are authorized: (a) Metal: 31A, 31B and 31N; (b) Rigid plastics: 31H1 and 31H2; (c) Composites: 31HZ1. Only liquids with a …

Composite IBC types are designated: (1) 11HZ1 Composite IBCs with a rigid plastic inner receptacle for solids loaded or discharged by gravity. (2) 11HZ2 Composite IBCs with a …

The hydrostatic pressure test must be conducted for the qualification of all metal, rigid plastic, and composite IBC design types intended to contain solids that are loaded or discharged under …

Gli IBC d’alluminio destinati al trasporto di liquidi infiammabili non devono comprendere parti mobili (come coperture, chiusure, ecc.) di acciaio non protetto suscettibile di ossidazione, che …

The requirements of this Chapter apply to intermediate bulk containers (IBCs) the use of which is expressly authorized for the carriage of certain dangerous goods according to the packing …