The International Building Code, beginning with the 2000 edition, describes the design methodology of concrete anchors by virtue of the language within the IBC itself, or through language in the Referenced Standard (ACI 318).

The Duradrive Wedge Anchor for cracked and uncracked concrete, described in Sections 2.0 through 7.0 of the evaluation report ESR-4853, complies with CBC Chapter 19, provided the design and installation are in accordance with the 2018 International Building Code® (IBC) provisions noted in the evaluation report and the additional requirements ...

Load combinations from 2006 IBC, Sections 1605.2.1 and 1605.3.1 (no seismic loading). Thirty percent dead load and 70 percent live load, controlling load combination 1.2D + 1.6L

The Wedge-All® anchors are alternatives to cast-in-place anchors described in Section 8.1.3 of (TMS 402/602-16 or 2013 TMS 402/ACI 530/ASCE edition), or Section 2.1.4 of (2011 or 2008 TMS 402/ACI 530/ASCE 5 editions) as referenced in Section 2107.1 of the IBC.

Seismic Wedge Type Anchors— bolt+ Wedge Anchor consists of a high-strength threaded anchor body, expansi n clip, hex nut and washer. The anchor body is cold-formed from AISI Typ 316 stainless steel materials. The expansion clip is fabricated from Type 316 stainless steel materi ls. The expansion clip consists of a split cylindrical ring with un

The RED HEAD Trubolt Wedge Anchors are used to resist static, wind, and earthquake (Seismic Design Categories A and B only) tension and shear loads in uncracked normal-weight concrete and lightweight concrete having a specified compressive strength, f′c, ranging from 2,500 psi to 8,500 psi (17.2 MPa to 58.6 MPa).

This was corrected in the 2009 IBC through the addition of a new entry for “anchors installed in hardened concrete”. However, note that continuous inspection for cast in anchors was still …

Technical Bulletin Wedge Anchor for temporary or permanent material attachment to cracked and uncracked concrete SIZES: 3/8" - 3/4" CODES: IBC, FL, LA, UL

About this chapter: Chapter 19 provides minimum accepted practices for the design and construction of buildings and structural components using concrete—both plain and reinforced. Chapter 19 relies primarily on the reference to American Concrete Institute (ACI) 318, Building Code Requirements for Structural Concrete.

Wedge-All® anchors are expansion anchors post-installed in predrilled holes in the face of fully grouted concrete-masonry (CMU) construction. The Wedge-All® anchors are alternatives to cast-in-place anchors described in Section 8.1.3 (2016, 2013 editions), or Section 2.1.4 (2011, 2008, 2005 editions) of TMS 402/ACI 530/ASCE 5 as referenced in ...