The EIP-2019 is an 8-ch remote analog input module. It supports not only voltage and current(internal resistors selectable) input type but also thermocouple type with B,C,E,J,K,N,R,S,T. There is an automatically cold-junction compensation (CJC) for each channel.

The I-7017 and I-7017F are analog input modules that offer either 8 differential input channels or 6 differential and 2 single-ended input channels, selectable via a jumper. The input type includes both voltage and current, and all channels are available for the same input range.

The ET-7026 is a multi-function module with 6-channel analog inputs, 2-channel analog outputs, 2-channel digital inputs and 2-channel digital outputs. It provides various programmable analog inputs (+/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA), and analog outputs (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA).

ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions. Our hardware and software is used in many industries including: energy storage, HVLS, building automation, manufacturing, packaging, agriculture, aerospace, oil & gas, power, robotics ...

The I-7000 series are the ultimate selection in Remote I/O Data Acquisition Modules. With these products, you can use the serial port on your laptop or desktop PC to connect to voltage inputs, thermocouples, strain gauges, rtds or any analog or digital sensors. The I-7000 Modules have low power consumption and require 10 to 30 VDC.

The DirectLink® ICP Module is an easy-to-use solution to monitor intracranial pressure (ICP) without the need for a stand-alone ICP monitor. The simple-to-use, two-button interface offers quick equipment setup for monitoring ICP.

Ethernet/IP based data acquisition modules communicate over Industrial Ethernet protocol over standard IEEE 802.3 and TCP/IP protocol suites. They are available in analog and digital I/O configurations and can be integrated with standard Ethernet cabling.

DirectLink® ICP Module Checklist Calibrating to Patient Bedside Monitor No. Description Covered 1 Connect the Patient Monitor Interface Cable to the output connection of the DirectLink™ ICP Module. 2 Connect the opposite end of the Patient Monitor Interface Cable to an available pressure input channel on the patient bedside monitor.

The I-7018P is an Analog Input module that features current and voltage input, as well as thermocouple input. The I-7018BL is a thermocouple input module. Both of the modules provide 8-channel differential or 6-channel differential and 2-channel single ended input that can be selected via a jumper, and all channels can be configured for the ...

2025年1月3日 · ICP PLC Peripheral Modules, ICP PLC Ethernet & Communication Modules, ICP PLC Input, Output & I/O Modules, ICP PLC Processors, ICP Component Sensors, Series 1 PLC Temperature Modules, Series 1 PLC Peripheral Modules, Series 1 PLC Ethernet & Communication Modules, Series 1 PLC Input, Output & I/O …