2023年6月13日 · Not too familiar with Siemens plc's and never used IO link before , but got an ifm starter kit, so some dumb questions coming up. I am good on relay logic, but bits n bytes are a bit of a struggle for me.🙃 I have the S7 set up with the IO …

2015年2月2日 · Thanks MrQ. I tried using the IFM Download program, and it also couldn't connect at any baud rate or protocol. I also tried a different serial cable, and a different PLC. Same problem. At this point, it must be an issue with my wiring. I'm going to try rewiring everything from scratch and retry.

2010年10月14日 · Our IFM rep allowed brought one in prior to each application to "bench-test" or validate our intended use prior to each order. When ordering your OD Dualis sensors, also buy the I/O cable from IFM, it is a 8-pin Micro connector, but the colors differ from a typical Lumberg or Turck cable. You will want to use the IFM cable with the IFM sensor.

2009年11月17日 · Hi all, We are using AS-I IFM modules to control some machines.There is a profibus cable which runs from s7-300 plc to the AS-I controller and an AS-I cable from the controller to the modules.How can i check the as-i address for a particular as-i module without using an as-i configurator?Is it...

2015年10月22日 · I've used IFM's maintenance tool to have a look and see if I can find out whats going on, but the Maint tool can't even find the PLC when scanning for an active node. I have had the issue before when the PLC "Forgets" what its node number is and defaults to 1 instead of 127, but that was a simple fix by changing the maintenance tool's node to 1 ...

2022年4月13日 · IFM IOLink AL1920 - Loss of configuration when PLC loses comms with it. Hello I have a 5069-L330ERMS2 Compact Guard Logic with a network that contains 54 nodes including 12 IFM IOLink Masters, mostly AL1326's but also...

2024年2月26日 · When adding an IFM AL1322 IO-Link Master Module to a 1756-EN2T Ethernet Card on a 1756-L82E Controller, The Input and Output data file does not have an array called 'Data'. Instead it contains individual tags named Input_Data1 , Input_Data2 etc... of type UINT. When I add it to a 1769-L30ER...

2023年9月1日 · IFM IOLink AL1920 - Loss of configuration when PLC loses comms with it. Hello I have a 5069-L330ERMS2 Compact Guard Logic with a network that contains 54 nodes including 12 IFM IOLink Masters, mostly AL1326's but also...

2009年11月7日 · Hi, i'm having bit of a problem with my Siemens CPU 314 IFM, the integrated analog inputs. I wire my pt100 to the plc analog input according to the manual from their website, however all i get in view mode is -16 value. And if i go have a look in the cpu hardware configuration, the only...

2002年12月15日 · In one of our machines we have Siemens PLC S7-300 and lots of ProfibusDP devises and 29 ASI slaves( sensors and Solenoid valves) supplied by our german machine supplier. We have a ASI to Profibus DP gateway from IFM electronics order no.AC1005 (. Yesterday night our gateway failed , we cycled...