1.1 Statement of Scope This specification establishes the general requirements for printed boards and the quality and reliability assurance requirements that must be met for their acquisition.

2024年7月28日 · IPC 6011 guidelines establish general requirements for printed boards and outline the level of quality and reliability they must meet. These standards etch into stone the ground rules for every step in:

This specification establishes the generic requirements for printed boards associated with the IPC-601X series of performance specifications and their quality and reliability assurance requirements.

2023年7月31日 · IPC 6011 guidelines establish the general requirement for PCBs and outline the required quality levels and reliability.

Serving as the foundation for the IPC-6010 Board Performance Documents series, it describes quality and reliability assurance requirements that must be met. For use with IPC-6012 through IPC-6018. Supersedes IPC-RB-276, IPC-SC-320, IPC-TC-500, IPC-ML-950C. 15 pages.

Serving as the foundation for the IPC-6010 Board Performance Documents series, it describes quality and reliability assurance requirements that must be met. For use with IPC-6012 through IPC-6018. Supersedes IPC-RB-276, IPC-SC-320, IPC-TC-500, IPC-ML-950C. 15 pages. Released July 1996.

1996年7月1日 · Class 3 High Reliability Electronic Products - Includes the equipment and products where continued performance or performance on demand is critical. Equipment downtime cannot be tolerated and must function when required such as in life support items or flight control systems.

The IPC-6010 series includes IPCÆs current qualification and performance specification standards for all major types of printed boards. The series includes IPC-6011, the base document which includes all generic requirements for printed boards regardless of substrate.

The IPC 6011 standard specifies the center of the hole and the ring’s width around the hole. A Class 1 ring can have 189 degrees breakout while Class 2 allows for 90 degrees breakout. For Class 3 rings, the IPC specifies its minimum measurement at 0.050 mm around the hole.

This document is available in PDF format.