2012年8月26日 · Before I finish coating the inside of my new forge with itc-100, I would like to hear from those who have used it before. How much did temperature increase - if at all? Did …

2010年2月16日 · Apply the ITC-100 the same way, placing a layer of plastic wrap over the insboard ends. When ready for the last coat of ITC-100, apply a good layer to the inside of the …

2010年10月17日 · A coating of ITC-100 over it is standard ( and will make the lining last longer and work better). The insulation is normally made stiffer by applying Rigidizer and then …

2004年8月20日 · You don't use ITC-100 directly on the wool. You first put on a 1/4" layer of satanite over the wool. Let it dry and then fire it on low to cure the refractory. Once that is …

2010年3月2日 · Has anyone tried using ITC-100 or another similar coating in an electric HT oven? It seems like most factory units come with bare firebrick. I'm wondering if it would increase the …

2008年4月15日 · Has anyone tried coating the interior of their oven with ITC-100? Just wondering if it would make a difference in how long it takes the oven come up to temp. Thanks, Lon

2017年2月23日 · So my first idea is to build a forge out of 10" pipe with 2" of insulation around it and ITC-100 HT. With a removable back plate so I can butt it up to and secure it to another …

2015年10月13日 · A PID controller is definitely worthwhile if you have the electrical ability to change it. The ITC-100 is an infra-red reflector and will give no benefit at all in this application. …

2013年5月2日 · After making any reapairs and re-firing if needed, I paint the satanite with a couple coats of ITC-100. It does not have to be very thick. It is a reflective coating, so …

2002年10月3日 · Hello all, I bought some itc100 from Ellis knifeworks a few weeks ago but havent been able to use it , trouble is the bags they sent it in are just ziploc's and they're starting to …