2018年4月13日 · The IC-7300 can talk around the world or it can struggle to talk to the guy in the next county. It depends on many other factors as I explained in your other thread. I have an IC …

2021年8月5日 · I use Fldigi for BPSK, Olivia, Contestia, DominoEX and several other modes. It was very easy to set up the IC-7300 to operate in D-SSB mode. You can find plenty of …

2021年3月27日 · Hi @zoofer, I owned a IC-7300 for couple years, traded up to an IC-7610. I used my 7300 to hunt for low band beacons (NDB, etc.), with great success. The low noise receiver, …

2023年9月25日 · Once you have the file downloaded you need to EXTRACT the file. I know it shows a .dat file but it is in fact a .zip file. Once you have extracted the file someplace where it …

2021年8月5日 · I bring my Icom IC-7300 to the top of Mont Hereford, Québec, Canada at 2800 feet elevation (875 meters) to do DX contacts, I will be operating on... Thread by: VE2FGJ , Jul …

2021年6月6日 · Great video but you just forgot to mention some of the most important settings of the IC-7300 for properly operating digital modes. 1. The filter settings of the IC-7300: Normally …

2020年12月18日 · The IC-7300 requires 13.8 volts DC (+/- 15%) at 21 amps in order to produce full rated power output. Connect a voltmeter across pins 3 and 4 of the TUNER connector (4 …

2025年2月15日 · I reworked the receive input of my 7300 and brought the coax from the T/R relay to the rear panel to an SMA IN and OUT where I can install filters and things in the receive …

2018年10月28日 · My club uses N1MM for logging, during events. It offers some rig control, but we generally use it to read the rig, while operating, and add details to the contact logged.

2024年6月19日 · ICOM Firmware V. 1.42 (May.16.2024) only addresses the IC-7300's operation with the ICOM IC-PW2 HF power amp, and add's a manual reset with the factory power …