2020年8月16日 · Afterward I purchased a Vgate iCar Pro BLE OBD2 adapter and the Chrysler 12+8 programming cable to use with JScan to set tire size. I tested the Vgate by simply plugging into the OBD2 connector. It started right up and connected to JScan, and I could read vehicle information and trouble codes, but not program, as expected.

2022年12月5日 · Got Jscan, the cable adaptor and an ICar Pro with bluetooth. After getting the cables out and plugged into the adaptor I can't connect to it. IOS. When I go to bluetooth I don't see it in the list. When I go to wifi I see V-link. If I try to …

2021年5月14日 · Ideally, I would like to hear from people who have done this recently using the JScan app. I just purchased the JScan license (for the app), a Vgate iCar Pro Bluetooth 4.0 (BLE) OBD2 Fault Code Reader OBDII Code Scanner Car Check Engine Light for iOS/Android (see below), and the security cable (also below).

2022年8月9日 · Early last month the CEL came on and the dealer read misfires on my 22 JTR. Two days later UPS delivered a Vgate iCar Pro BLE adapter and one of the forum recommended bypass cables for use with Jscan. After seeing how hard it was to get at the gateway connections, I also bought a Zautomotive extension cable.

2021年5月14日 · The one your picturing is the 'Vgate iCar pro LE' The one he bought was the 'Vgate iCar pro BLE' The 'BLE' is the same one I have that works just fine. Similar but different models names on the adapters.

2024年12月23日 · The difference is essentially going from 32s to 33s (not exactly, but read on). The change threw the speedometer off by about +2 MPH at 60. I got the contraptions (iCar Pro dongle & wiring pigtail) necessary to use Jscan to recalibrate the PCM. That got ther speedo dead on per GPS. Mileage since then has been 18 - 22 mpg.

2022年7月7日 · Vgate iCar Pro Bluetooth 4.0 (BLE) OBD2 Fault Code Reader OBDII Code Scanner Car Check Engine Light for iOS/Android https://a.co/d/8alpfLT I believe there is a newer one Jscan recommends on their site, but that one still works fine for me.

2022年2月21日 · Maybe just a hair over $100... Bluetooth OBD adapter (verified to work) - $119 Bypass Cable - $20 JScan license - $25

2021年1月11日 · You will need the security bypass cable and an OBD adapter such as the OBDLink MX+ or vGate iCar Pro, etc. and software such as jscan or AlfaOBD. It appears access to the necessary settings MAY exist in jscan, but I used AlfaOBD in this case (I have both and found a couple of the settings in jscan but cannot prove that it has everything needed.)

2022年3月14日 · These are most of the PowerNet and CUSW-based Chrysler/Dodge/Ram(with the exception of RAM Pro Master before 2022 and RAM Pro Master City)/Jeep vehicles starting from about 2012, and Fiat Tipo/Egea. No additional adapters are needed on these cars when using OBDLink EX or MX+.