2021年6月2日 · The same Integration Relay also controls the horn and IGCT circuits. If I were you I would explain the following: a.) what problems/issues that you are having; b.) what caused you to suspect the Integration Relay; and c.) have you checked under-hood fuses for IGCT, horn, AM2 and EFI before advancing to the Integration Relay?

2019年6月13日 · Is the IGCT relay built in to the integrated circuit in the fuse panel in the engine compartment? I am blowing the HEV 20 Amp fuse and am looking for...

2019年1月27日 · CHECK HARNESS AND CONNECTOR (IGCT RELAY - BATTERY SMART UNIT) I measured and found continuity between c1-4 (IGCT) and the IGCT relay terminal 5 on the fuse block.

2019年2月4日 · For the inverter water pump assembly, control and power supply are separate. Power (+BWP, blue wire) comes from the IGCT NO. 3 fuse in the Engine Room Junction Block Assembly. That fuse is fed, along with other loads, from the IGCT relay in the same place; there isn’t a relay dedicated to the inverter water pump.

2017年12月22日 · U0293 Lost Comm w/ Hybrid Powertrain Control Module Discussion in ' Gen 2 Prius Care, Maintenance and Troubleshooting ' started by tracy ing, Feb 17, 2018.

Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary.

2010年5月3日 · Wire harness or connector IGCT fuse IGCT No. 2 fuse IGCT relay Battery smart unit Comes on Comes on Comes on Comes on

NOTICE: After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction. (b) Disconnect connector A59 from the inverter with converter assembly. (c) Remove the IGCT No. 2 fuse from the engine room junction block assembly.

Back Door Opener (w/ Smart Key System), Hybrid Vehicle Immobiliser System, Smart Key System,

1 B IG2 A22(B), L5(C), L6(D) Power Management Control ECU