2010年12月26日 · (InfoTM Update Wrap tools) IUW Version 1.2 attached at the bottom of this post and posted with additional information at xdadevelopers. Copied directly from "Introduction of IUW burning-20110118.docx" which was included in several update file (*.ius) archives. Introduction of IUW Burning...

2011年6月15日 · IUW Version 1.2 attached at the bottom of this post and posted with additional information at xdadevelopers. Copied directly from "Introduction of IUW burning-20110118.docx" which was included in several update file (*.ius) archives. Introduction of IUW Burning Tools

2011年12月2日 · Im having trouble figuring out how to get the sytab10st to do a 'recovery' burn. I tried using IUW 1.2 first with usb link. 1. Push reset. 2. Press and hold power and menu. This seems to put it in to 'firmware download' mode. 3. Plug in male to male usb. (Install driver) 4. Click burn. Doing these steps it causes the tablet to just reboot right away. Then I tried the sd card method. That ...

2012年5月13日 · Start "IUW.exe" which may be located in the "iuw1.2" folder created when the files were extracted from the archive which is attached. In the "Paths:" section "Choose a wrapped image:" by clicking on the ". . ."

2011年7月16日 · 5. Push power button like you are turning it on and set the tablet down. 6. Computer will recognize new device and ask for drivers. Point the driver tool at the second folder called otg_driver for all drivers needed. (comes in iuw package) 7. Now open first folder in iuw package iuw1.2 (iuw1.2 ) and run program. 8.

Senior Member Dec 26, 2010 627 191 Apr 6, 2011 #1 Caution: If your tablet was shipped with Android 2.2 DO NOT UPDATE! These update files are beta and months old. This process was originally intended for the manual upgrade of 2.1 tablets. Using a microSD card OR from computer using USB cable and OTG Port The following process will manually update the SYNET7LP/SYTABEX7 or Disgo 6000 to Digital ...

2013年11月25日 · Well, this is a not so good tutorial because i´m new to android and can´t get to undestand perfectly how it works. It worked for me, not respond if doesn´t...

2010年12月26日 · We do know from Version 1.2 of the InfoTM Update Wrap Tools (IUW.exe) that the first digit represents the Company however, the board 6,1,5 is not identified. Also the U0 "u-boot-nand.bin" is a different version and burning the wrong U0 image seems to be the major cause of most reported brick tablets.

2011年12月24日 · (7) Follow Step4 in the instructions and burn the .ius file into the microSD card with the IUW.exe tool. I burned mine on a 1GB FAT32 formatted microSD card using Windows XP. If all goes well, you SVP TPC7901 tablet should be able to boot to the Android OS 2.2 and transforms into a Sylvania SYNET7LP tablet! Before you go reloading all your favorite apps, run Upgrade System from the Android OS ...

2011年11月25日 · To make a long story short, I was tired last night and not paying enough attention, and I used the IUW burn tool to flash u-boot.bin as the U0 in the 2852...