TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING. If the ACC Module -J428- will not calibrate after replacement, there may be various data faults in the driver assistance …

Place adaptive cruise control unit -J428- on a soft and clean surface. Using digital calliper -VAS 6335-, measure setting -a- of all adjustment screws and correct, if necessary. Dimension -a- = …

There may be a time when the -J428- Distance Regulation Control Module has been replaced or other work has been performed and now there are faults stored that state: “No enable …

Adjust adaptive cruise control unit -J428-. If wheel alignment has just been carried out, the steps described under “Setting without preceding wheel alignment” do not have to be carried out. …

VW ID.4 Driver Assist System Removing and installing adaptive cruise control unit [J428]

Mar 29, 2020 · Physically, the sensor behind the front VW badge, has no visible damage and the sensor's connector is clean with no corrosion. The sensor is an TRW AC20. I have measured …

Nov 24, 2017 · There may be a time when the -J428- Distance Regulation Control Module has been replaced or other work has been performed and now there are faults stored that state: …

Distance Regulation Control Module J428, Removing And Installing. Distance Regulation Control Module J428 is mounted on front of vehicle, behind VW-logo in the radiator protective grille. …

Steuergerät für die automatische Distanzregelung aus- und einbauen, mit Halteplatte und Adapterrahmen. Hinweis. Wenn das Steuergerät für Abstandsregelung -J428- ersetzt wird, in …

The adaptive cruise control unit -J428- needs to be calibrated if the following conditions apply: Adaptive cruise control unit -J428- has been removed and then reinstalled or it has been …