2024年9月19日 · I have an HP 2920. It appears it has grabbed the same IP as the Meraki firewall, so traffic is not flowing properly. I’ve done hard resets on all equipment, cable changes, and …

2013年7月16日 · Howdy, folks. I’m trying to spec out a new 48 port switch for our brand spanking new secondary server room. The switch needs to provide POE to all 48 ports, support …

2016年8月20日 · Never worked with an HP Aruba switch before, not familiar with its CLI, trying to setup multiple vlans to send traffic to our Sonicwall gateway. I believe static routes need to be …

2024年8月14日 · Hi all, I want to stack my 3 Aruba 2920 switches in a Ring topology, but it’s stuck in Chain. Here is my stacking cable diagram : show run Running configuration: ; hpStack_WB …

2022年4月19日 · Can anyone speak to likely success or failure in trying to update “HP J9726A 2920-24G” switches directly to the latest available firmware? A very long time ago, HPE/Aruba …

2021年9月26日 · I picked up an HP 2530-48g J9772A switch for my home lab that I am trying to reset, but the instructions provided by HP don’t seem to be working: 1. Using pointed objects, …

2015年7月20日 · Hi everyone, Very useful info, HOWEVER: I found a solution that differs to the above, when using TFTP to get the config onto the switch.

2017年11月17日 · Well, the 2920-48G-POE uses the J9738A power supply. The 2920-48G-POE 740W uses the J9739A power supply. They are both the same form-factor PSU, but the …

2014年6月9日 · hi guys just picking up on this old thread, as , no doubt your aware im having an issue. I have a 2610 j9087a version r11.15 (yes its old, been reset) and wish to upgrade to …

2014年1月8日 · Solved: plugging into a non console port. simple problems simple person. Thanks for the advice.