Available in four bore size options, series CJP2 includes a tiny, but powerful, 4mm bore size option making it the smallest double acting pin cylinder around. 6, 10 and 16mm bore sizes complete the range, all featuring extruded aluminium bodies, making them not only compact, but extremely light weight.

2011年12月19日 · I'm working on a bit of documentation for the new Uno, and am wondering the purpose of the JP2 jumpers. Judging by the schematic, they connect PB4 to PB6, and PB5 to PB7, on the Atmega16U2. Can anyway say what the purpo…

Available in four bore size options, series CJP2 includes a tiny, but powerful, 4mm bore size option making it the smallest double acting pin cylinder around. 6, 10 and 16mm bore sizes complete the range, all featuring extruded aluminium bodies, making them not only compact, but extremely light weight.

在jp1/jp2都斷開的情況下，充電晶片會以80ma的充電速度對電池進行充電，這個充電電流適合用於大部分的中小型電池。在jp2連接的狀態下，電池會以500 ma的電流進行充電，而在jp1連結時，則會以1a的電流對電池進行充電。

JP2 is an 80-pin high-density connector providing access to FPGA Bank 1. Several pins (38, 40, 54, 58, 59, 61, 77, and 79) of this connector are wired to global clock inputs on the FPGA and can therefore be used as inputs to the global clock network.

2020年3月29日 · You COULD use those pins by programming the Atmega328 first, and to have it send RX commands to the atmega16 which are something like "4,1" meaning turn on pin 4. Then you have to program the atmega16u2 to interpret this message and turn on the pin.

2021年3月7日 · There are clever ways to reuse pins on microcontrollers. For example, it is possible to put an LED and a switch on the same GPIO pin. And there are GPIO expanders, SPI/I2C ADCs, etc. Messing with JP2 and programming the ATMegaXU2 and having it coordinate with the 328P may be more trouble than you like just to get a couple extra pins.

Machine builders looking to combine small double acting pin cylinders for clamping, pushing or stopping applications in their machines often have to juggle between the available components and the available space.

cdjp2b10-25d-m9b c(d)jp2, pin The body material has been changed from brass to aluminium, achieving impressive weight reduction. The overall length of the cylinder has been reduced resulting in an extremly compact cylinder.

Configure Jumper JP4 before use, refer to jumper section. All even numbered pins are GND. A jumper is installed by default. The board will not function without this jumper without the I2C option installed. JTAG connector for programming firmware.