Creality K-series shims for improved bed leveling | Download free 3D printable STL models

Run Bed leveling through fluidd/mainsail and generate the bed mesh. Look at the bed mesh. Using the front two Z screws (by the front door) you will rotate them either left and right to make the bed EVEN with the back screw. DO NOT USE THE BACK SCREW TO ROTATE. There isnt a good place to grip it to rotate it without damaging the threads.

Hey guys, complimentary to the shim posted by "NeedItMakeIt" in another platform, I designed those shims to level the bed in the back corner

2024年2月6日 · So my solution for the cupped bed was to use the shims to level it. Then loosen all 4 strain gauge bolts. DO NOT REMOVE. Heat bed to 60c. Leave heated for 5 min. Retighten all 4 strain gauge bolts snug DO NOT over tighten. This is a vast improvement for my K1 Max.

2024年10月13日 · They are designed to be placed between the strain gauge and the bed's frame. I recommend using either ABS or PETG because of the heat around the region. And ABS would be a preference over PETG because it is relatively more rigid than the latter, working better as a shim because of this.

10000+ "crealiyl k1 shims" printable 3D Models. Every Day new 3D Models from all over the World. Click to find the best Results for crealiyl k1 shims Models for your 3D Printer.

10000+ "k1c bed levelling shims" printable 3D Models. Every Day new 3D Models from all over the World. Click to find the best Results for k1c bed levelling shims Models for your 3D Printer.

2023年9月3日 · Yes, I've shimmed my bed using a combination of 0.5mm washers and 0.1mm plastic shims. Which area did you shim? Under the 4 corner bolts? There is only three places to shim, under the screws where it attaches to the z rods, but yes.