2010年10月31日 · I've a Civic SI 2006 K20Z3 and I can get a complete k24a2. I want to use the K20Z3 head with the K24a2 block (frank). I found informations for the K20A2 head but nothing about the K20Z3. My question is do I need to modify anything to get this thing going in accordance to a k24a2, as in the...

2021年8月18日 · Pretty new here on the forum, but asking for advice. I have a 2013 si and want to swap my head with a K20z3, I have no clue weather or not if I want to change my cams, valves, ect. I plan on using it as a daily, and am aiming for about 250hp

2020年12月20日 · So far I bought everything except the head New! Between the plm header, ported k20z3 head new supertech guides and seals, (still in machine shop) all new oem chains, tensioners, guides, prl oil pump kit, 4piston ported oil pump, inlinepro head studs, acl race bearings, DC oil filter baffle Ive spent $2250!

2012年9月28日 · The idler pulley on the K20z3 unbolts and the K20 belt driven power steering pump bolts directly on to the same bolt locations, even using the same bolts. Therefore this is a true bolt on swap for power steering.

2013年2月24日 · compression is higher with k20 head. the combustion chamber is like 2-3cc's smaller iirc.

2010年5月31日 · Hi guys, I was building a K20Z3 engine, until I came across with a K24A4 block with internals. So now I have a few questions. I have the complete Z3 engine with transmission, water pump, oil pump, pan, and everything else. My questions are : Is the Z3 water pump, oil pump and pan ok and...

2009年6月4日 · just use the k20z3 head if you're running a k20 block. on some k24 setups, the k24a2 head and intake manifold were more beneficial. i'm too lazy to find links so take my info with a grain of salt :dance: edit: if it's the tsx head...i think the ports aren't as …

2022年3月8日 · i have a rsx type s with k20a3 block. k20z3 cylinder head complete. type s transmission, type s ecu, type s intake, type s harness, type s oil pump, a friend offers me some k20z3 pistons and crankshaft, they fit in the k20a3 block, do I need k20z3 bearing bushes? without what they sell me the...

2013年5月7日 · Thinking about swapping a k20z3 head on my k24z7. Should i do it or not? Please tell me the disadvantages and advantages.

2020年10月10日 · The z3 head is only a few cfm behind the PRB type s casting. It may not hurt to keep the k20 cams in case you do forced induction down the road and like those better. Have you dyno the engine as it currently is with the rbb head? Would be a nice comparison to see before and after the z3 head swap.