2021年12月15日 · KTM went to the 36 years ago to improve low end response. Read through this comparison of 5 different carbs done by JD jetting a few years ago. It includes dyno charts for all. https://ktmtalk.com/showthread.php?529919-Full-Throttle-Carb-Shootout-Mikuni-TMX-Keihin-PWM-Smartcarb-Lectron-36-amp-38mm. Joe.

KTM 300- Stock 36mm Carb vs 38mm PWM Carb = 52HP. Keihin 38mm PWM carb and a well tuned power valve can make huge gains in power.

2021年11月27日 · Wondering if anyone has tried pairing a 36mm Keihin PWK with their 18-19 EC/XC 300? It seems like it would improve low end grunt/torque at the expense of a little top end hp. GG did put 36mm carbs on some of their older 250/300 bikes so it has been done. Like you guessed, a smaller carb will make more torque at the expense of some top end.

2019年2月11日 · Both. You'll increase torque at part throttle openings, which of course make it respond faster. And make it work better in tough conditions that require precise throttle control. As an example, my KTM 200 came with a 38mm carb. …

2021年8月5日 · Some of you may have been following my posts about the Mikuni TMX on my 300 XC-W. I finally decided to order a brand new 36mm Keihin Air Striker (short body). It came with a JD jetting kit. But, it's worth noting that it's a generic 250/300 kit and not one specifically for KTM 300's. Here's the pertinent info: Elevation: less than 1500 feet

2020年9月17日 · In it we summarize the reasoning between choosing one size over another, explaining that the 250s and 300s can go either size, but the best choice comes down to what you're looking to prioritize most. The 36mm will give it a bit stronger and more crisp bottom end response and also the best fuel economy gains of the two.

2024年9月4日 · 2019 300 xc 36 keihin pwk jetting. I just picked up a keihin 36 pwk. No jets or needle in it. Cant find much information about jetting it. Looking for some good advice. 0-1000 ft elevation. Slow single track joy riding. From New Jersey to the Poconos. Thanks. Where is your owners manual and service manual?

Replace your small stock carburetor with this 36mm Keihin PWK Airstriker AG KTM Short body for improved performance! **The JDJetting kit is included for you to install.** Carburetors cannot be returned after fuel has been run thru them due to shipping regulations.

2014年11月9日 · Anyone have a baseline jetting specs for running a Keihin carb on the new KTM 250cc motor? I'm running a stock engine with a pipe and around sea level and 100ll/91Oct mix, 50:1. I heard the new 250 motor needs more fuel than the 2016 and older 250SX, FWIW.

Short Body Keihin PWK 36mm carb to suit KTM and Husky 250/300s. A great upgrade from the stock Mikuni carb. Works with the stock throttle cable. Comes with TSP jetting to suit 2014-2018 models plus some spare jets. Please let us know if you have a different model and we may be able to supply different jetting. Image is for illustration purposes ...