The KL2612 output terminal switches two relays, each having one changeover contact, under control of the automation device. It has potential-free contacts. The power contacts are not looped through. *s: solid wire; st: stranded wire; f: with ferrule.

2015年7月7日 · Only 18 left in stock - order soon. Help others learn more about this product by uploading a video! Looking for specific info?

Product NUmber:KL2612. Product Type: Analog output terminal. Number of outputs: 2 x change-over. Nominal voltage: 125 V AC/30 V DC. Load type: ohmic. Max. output current: 2 A per channel. Switching current: 0.5 A AC/2 A DC (ohmic) Ohmic switching current: 0.5 A AC/2 A DC. Minimum permitted load: 10 µA at 10 mV

2024年4月19日 · 本文介绍了KL2612输出端子在自动化设备中的应用，详细阐述了其2个转换继电器的特性，包括电压、电流限制、电气隔离、EMC性能和温度/湿度要求等。 KL2612输出端子在 自动化 设备的控制下切换两个 继电器，每个继电器都有一个转换触点。 它具有无电势触点。 电源触点未穿过。 灯测试，最大电子镇流器。 2 A启动电流. 电流消耗K-bus典型值。 60毫安. 机械操作循环。 （最小）1 x 108. 操作循环电动。 （最小值）2 x 105（1 A/30 V DC） 重量约。 80 …

继电器触点直接连接电源触点，可以用到 230v ac，它通常用于需要主电源的开关设备。每个总线端子模块都有一个 led 用来指示其信号状态。kl2612 和 kl2622 总线端子模块配有无源触点。电源触点未连成回路。 技术参数 kl2602 | ks2602 kl2612 | ks2612 kl2622 | ks2622

The KL2612 output terminal switches two relays, each having one changeover contact, under control of the automation device. The signal state of the bus terminal is indicated by an LED. If the LED is on, it means that the contact between 2 and 1 or, in the case of the second relay, between 6 and 5, is closed. The KL2612 Bus Terminal does not have a

The KL2612 output terminal switches two relays, each having one changeover contact, under control of the automation device. It has potential-free contacts...

KL2612 – two-channel relay output terminal with changeover contacts. Controlled by the automation device, the KL/KS2612 relay output terminals switch two relays, each with a single changeover contact. They are equipped with potential-free contacts. The signal status of the relay is displayed by an LED.

The KL2612 output terminal switches two relays, each having one changeover contact, under control of the automation device. It has potential-free contacts. The power contacts are not looped through.

2023年6月5日 · kl2602 输出端子模块有二个继电器，每个继电器有一个单触点。继电器触点直接连接电源触点，*大可以用到 230v ac，它通常用于需要主电源的开关设备。每个总线端子模块都有一个 led 用来指示其信号状态。kl2612 和 kl2622 总线端子模块配有无源触点。