The LM34 series devices are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Fahrenheit temperature.

Below is the pinout of the LM34 IC: Pin 1 receives positive DC voltage in order for the IC to work. This, again, is voltage approximately 5 volts. Pin 3 is the ground, so it receives the ground or negative terminal of the DC power supply. And Pin 2 is the output of the IC, outputting an analog voltage in porportion to the temperature it measures.

TI’s LM34 is a ±1°F 5V-30V, Analog output temperature sensor with Fahrenheit scale calibration. Find parameters, ordering and quality information

The LM34 is a precision integrated-circuit temperature sensor, whose output voltage is linearly proportional to the Fahrenheit temperature. The LM34 thus has an advantage over linear temperature sensors calibrated in degrees Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Fahrenheit ...

self-heating, less than 0.2˚F in still air. The LM34 is rated to operate over a −50˚ to +300˚F temperature range, while the LM34C is rated for a −40˚ to +230˚F range (0˚F with im-proved accuracy). The LM34 series is available packaged in hermetic TO …

The LM34 is rated to operate over a b50§ to a300§F temperature range, while the LM34C is rated for a b40§ to a230§F range (0§F with improved accuracy). The LM34 series is available packaged in hermetic TO-46 transistor packages, while the LM34C, LM34CA and LM34D are also available in the plastic TO-92 transistor package. The LM34D is also

LM34DM TI 温度传感器芯片中文资料PDF, 共 (23)页, LM34DM数据手册有芯片封装SOIC-8引脚图及功能定义和参数资料, 带华氏刻度的 ±1°F 5V 至 30V 模拟输出温度传感器 8-SOIC 0 to 100。

The LM34 is rated to operate over to +300°F temperature range, while the LM34C is rated for to +230°F range (0°F with improved accuracy). The LM34 series is available packaged in hermetic TO-46 transistor packages, while the LM34C, LM34CA and LM34D are also available in the plastic TO-92 transistor package.

Below is the pinout of the LM34 IC: Pin 1 receives positive DC voltage in order for the IC to work. This, again, is voltage approximately 5 volts. Pin 3 is the ground, so it receives the ground or negative terminal of the DC power supply. And Pin 2 is the output of the IC, outputting an analog voltage in porportion to the temperature it measures.

STEP 4: Open the Temperature sensor (LM34) Sample code from GizDuino Starter kit code. STEP 5: Then, click Upload. This sample code is simply read the Sensor output. */ //initializes/defines the output pin of the LM34 temperature sensor: int LM34_pin= 0; //this sets the ground pin to LOW and the input voltage pin to high: void setup() {Serial ...