Products » LPS 800. LPS 800 PRODUCT INFORMATION. Power Resistor for Mounting onto a Heatsink Thick Film Technology. FEATURES. Compliant with requirement #26 of NF-EN45545-2. High power 800 W at 85 °C bottom case temperature. Wide resistance range: 0.3 Ω to 900 kΩ E24 series. Datasheet.

2012年6月29日 · Vishay/Sfernice's LPS300, LPS600, and LPS800 series thick film resistors are non-inductive (< 0.1 µH) and provide a wide resistance range of 0.3 Ω to 900 kΩ. Featuring compact footprints of 57 mm by 60 mm and low weight of 83 g, these devices save valuable space on the circuit board, allowing designers to reduce the size of their end products.

RTH (c - a) for LPS 800 power dissipation 180 W at +50 °C room temperature. Configuration 1: Water cooling heatsink CP15 from Lytron (304 mm x 95.3 mm x 8 mm) with water flow rate 4 LPM and thermal grease Bluesil Past 340 from BlueStar silicones.

LPS 800 Vishay Sfernice Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 °C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy mounting Low thermal radiation of the case Compliant to RoHS directive 2002/95/EC Note Tolerances unless stated: ± 0.2 mm

LPS0800H1R00JB – 1 Ohms ±5% 800W Thick Film Chassis Mount Resistor from Vishay Sfernice. Pricing and Availability on millions of electronic components from Digi-Key Electronics.

2019年6月20日 · Vishay / Sfernice Power Resistors offer 800W rated power at +85°C bottom-case temperature with a wide resistance range of 0.3Ω to 900kΩ. These non-inductive resistors feature thick film technology with easy heat-sink mounting. Vishay / Sfernice Power Resistors are lead free and RoHS compliant.

2025年3月7日 · LPS0800H1500KB Vishay / Sfernice Planar Resistors - Chassis Mount LPS 800 H 150U 10% BO15 e datasheet, inventory, & pricing.

The LPS 800 from Liebherr is the largest portal crane available on the market, which is based on our successful mobile harbour crane concept. The crane impresses with its unique performance data in container and general cargo handling, and processes up …

In order to improve thermal conductivity, surfaces in contact (alumina, II) easier and faster to install than the grease. availability. The user must choose the heatsin k according to the workin g conditions of the component (power, room temperature). must not exceed 175 °C. The dissipated power is simply calculated by the following ratio:

LPS 800 Power Resistor for Mounting onto a Heatsink Thick Film Technology Vishay Sfernice OVERLOADS In any case the applied voltage must be lower than UL = 5000 V. Short time overload: 1.5 x Pr/10 s Accidental overload: The values indicated on the following graph are applicable to resistors in air or mounted onto a heatsink. ENERGY CURVE POWER ...