2013年4月15日 · Tuning a Lectron carburetor guideline... Install the carb as sent and fire it up. Get it fully warmed up and cleared out. Evaluate how it runs. You should be about 1-1.5 turns out on the idle adjustment and it should start and idle fine. If it needs more then 1.5 turns out to maintain a good idle the rod is set to rich, if it idles high it is ...

2015年4月6日 · My 83 XC500 get a Lectron carb (pix) Discussion in 'Vintage/Left Kickers' started by Motosportz, Mar 26, ...

2013年3月7日 · Lectron a couple of weeks ago to replace my RB Designs FCR 41 but have been a little slow getting it installed because of and bad wreck that involved broken ribs and a collapsed lung. Anyway, yesterday I decided to put it on my TE450 because it is much easier/faster to work on because of all the junk I have on the 610 like the IMS tank with it ...

2013年12月18日 · wr 360 2002 running lectron in uk FANTASTIC get it get it get it this transformed my bike into a better smoother faster tractor of a stump pulling monster, i now realsie that dropping over £60 on main and pilot jets for the mikuni was a complete waste, should of just put that towards the lectron.

2013年11月13日 · My wr300 has benefited greatly from the Lectron with starting and nice torque power. I remember someone having an issue with the rubber choke boot displacing, moving off its seat, and causing some slight rich problems. I had to do a couple of full throttle flood starts to fire up the wr300. That was a new one on the Lectron.

2014年9月20日 · If you buy your Lectron through 'Motorsportz' on this site, it will be a perfect fit. He will need the overall length and diameters of the engine and airbox ends. You will also need to provide the settings you have already in the Gurtner (although that might be difficult to compare). The stock jetting on a 390 Mikuni is very similar.

2015年2月28日 · So far the Lectron has been great and a pleasure to adjust but I'm running into the problem of it overfilling three times now. Seems to just happen whenever the carb pleases - its not constant. First time it overfilled I found what appear to be metal shavings in the float bowl almost like a metal sand in a few places.

2013年7月20日 · any progress on a Lectron for a 610? thanks in advance for any info Ross Shafer, Jul 20, 2013 #4. K ...

2015年4月13日 · Installed a Lectron on my 1992 WR500 big bore 2 stroke Yamaha 2 days ago. Rode 65 miles at a A pace with some fast guys yesterday. Flat freaking LOVED it and it transformed the bike. Super smooth endless linear power everywhere. 5 mpg better, was able to ride the bike in 2nd position behind a very fast A class dude and not have him gap me much.

2013年1月2日 · - Bolt on and enjoy. We (Motosportz) are working with the good people at Lectron to make these a drop on and go proposition for the huskys. Right cable guide, right bell size, right metering rod set to the right position. Bolt on and go.