2020年1月10日 · 通常用于平滑的调节音量，或是音频的渐入和渐出效果。 比较常见的fader有line和cubic线型的fader。 line fader即fader的渐变过程是线性的。cubic的渐变过程是三次曲线。fader主要有三个参数，attuationDb, ..._音效算法

2025年2月21日 · Faders on a mixer, also known as slide potentiometers, are control devices that allow you to adjust the level or intensity of different audio signals. They are typically used in audio production to balance the sound levels of multiple tracks or channels. By moving the fader up or down, you can increase or decrease the volume of a particular track.

GAIN 增益控制旋钮 (输入电平调节)，在调音台电路中，调整设定输入信号有一个宽的不失真动态范围和最佳信噪比。 GAIN提供了40dB连续可调增益范围，当设定为-40dB时，信号电平最低，即输入信号被衰减了40dB;当设置在0dB位置时，衰减量为0，输入信号最强。 在调GAIN旋钮时，首先把GAIN旋钮顺时针方向调到峰值指示灯刚好一直亮的位置，然后逆时针方向慢慢地旋回到指示灯熄灭的位置，再往回调增大约6dB，使指示灯处在信号峰值出现时即亮的电平临界线上，这样 …

2005年12月13日 · Each channel will have a gain control; it will also have a level control (the fader). Superficially, both will seem to do the same thing - control how loud the signal in the channel is. But they do it in different ways.

2019年9月5日 · On top of that, you might have channel volume, master volume, guitar volume, fader levels, guitar amp gain, mixer board gain … etc. But, it’s pretty important stuff to understand if you want to get a good sound from your equipment.

2021年2月10日 · The difference is that the input gain will affect ANY (channel OR insert) non-linear effect such as dynamics, saturation, distortion, etc. while the fader will not.

Audio mixer faders in a London pub. In audio engineering, a fade is a gradual increase or decrease in the level of an audio signal. [1] The term can also be used for film cinematography or theatre lighting in much the same way (see fade (filmmaking) and fade (lighting)). In sound recording and reproduction a song may be gradually reduced to silence at its end (fade-out), or may gradually ...

2018年12月6日 · The point of a level fader is for gain-staging; for the input, to hit the plugin with its optimal level (for things like compressors which have reactive thresholds); for the output, to adjust the level so it is on par with the original level (useful for objective comparison).

Mute & Level Fader Next, we find the mute button and fader, which control the level of this channel in the main mix. Setting the fader to 0 dB, or unity gain, will allow the signal to pass without boosting or cutting the level.

2015年4月27日 · From here, try and use the level fader on your microphone channel to obtain a higher signal. This will require you going above unity gain. If raising the level fader also increases the hiss in your audio, try boosting the signal in your recording software or if you’re using an audio recorder, increase the input setting.