2016年7月20日 · There are several methods to lubricating chain. CM recommends soaking chain, and then hanging chain overnight once saturated. We use a small oil can to run a line of oil as the chain is moving during the process of setting limits to avoid over-saturation. Use a clean, dry rag to remove excessive oil that remains.

SKF LHHT 250 is a high-performance synthetic oil specially formulated for the lubrication of chains at high temperatures and high loads. It provides excellent load and anti-wear properties and forms virtually no lacquers or residues, even when operating at high temperatures.

Chain damage is primarily caused by incorrect lubrication. The chain oil must be applied so that it can pass along the inner and outer links and edges directly onto the chain joint to lubricate the friction point.

High-performance synthetic oil specially formulated for the lubrication of chains at high temperature and high loads. It provides excellent load and anti-wear properties and forms virtually no lacquers or residues, even when operating at high temperatures. Increase chain life and re-lubrication interval Reduce oil consumption and energy consumption

Chain lubrication is needed mainly to slow the wear between the pins and bushings in the chain joints, to flush out wear debris and foreign materials, and to smooth the chain’s engagement with the sprocket. Additionally, lubrication may be needed to inhibit rust and corrosion, to carry away heat, and to cushion impact forces.

To select the appropriate chain oil, you must consider the operating conditions, environment, load, and temperature. It is also important to follow the manufacturer's recommendations and …

LHHT 250 is a high-performance synthetic oil specially formulated for the lubrication of chains at high temperatures and high loads. It provides excellent load and anti-wear properties and forms virtually no lacquers or residues, even when operating at high temperatures.

High performance, high temperature chain lubricant with outstanding load carrying and anti-wear performance. CHAINGUARD 230 is an ester based high temperature chain oil specifically formulated for the lubrication of all drive and transport chains and bearings running continuously at temperatures up to 230°C and up to 280°C for short periods.

This is a 1 gallon container of Lubriplate Oil, used to lubricate load chain. This is suitable for all sizes of CM Load Chain.

SAM HT-4800 is a high temperature, high load chain oil formulated with proprietary additives to function over a wide temperature range of -10°C to +200°C. It can be applied by brush lubrication, drip feed lubrication or through Central Lubrication system by means of a grease pump.