LUT-MLC This instruction sheet provides wiring and installation instructions for switches controlling CFL, LED and Fluorescent lighting without a neutral connection available. ON OFF OFF ON OFF NOTE | NOTA: Only one LUT-MLC is required per switch. Sólo se requiere un LUT-MLC por interruptor. Switched Hot Cambiado a Vivo Light(s) LUT-MLC ...

To ensure proper operation of the switch with LED, fluorescent, and ELV loads, a LUT-MLC (included) may be required, especially at lower wattages. If the status LED on the switch is flashing or solid red in color, a LUT-MLC must be installed.

Install the LUT-MLC inside a load fixture or in a separate junction box within the circuit. G4.0, G5.3,and G6.35 Base Spring Loaded Bi-Pin LED / Halogen Porcelain Socket with Recessed Holes and 10in. Long 18/1 SF-1 Wire Leads. Rated for use Maximum 150W, 25V. 1/2in Center to Center Mounting...

Minimum load capacitor for Lutron digital dimmers. The LUT-MLC load adapter is provided to help ensure proper operation of the switch with LED, CFL, fluorescent, and ELV lighting loads. When controlling one of these load types, a LUT-MLC may be required, especially at lower wattages.

LUT-MLC* load adapter * Note: A LUT-MLC may be required to ensure proper function with CFL, LED, ELV, and fluorescent lighting. Please see instructions for installing the LUT-MLC that can be found on page 2 of this install guide. The instructions can also be found by visiting www.casetawireless.com/lutmlc

Lutron LUT-MLC Minimum Load Capacitor For Digital Dimmers Technical Description : Shunt Capacitor, Non-Neutral Type; Compact Fluorescent Light, LED Light Fixture Used on; Voltage Rating 120/277 Volt AC 50/60 Hertz

We find the easiest way to handle an exchange is to make your return and place a new order for the correct product. Special ordered products as well as custom colors and made-to-order fixtures are not returnable. Have any questions? Talk with us directly using LiveChat.