Pico wireless controls are for use with Lutron® RF systems. The controls are programmed by the installer as shown in these instructions or the system Setup Guide. Important Notes Codes: Install in accordance with all local and national electrical codes. Environment: Ambient operating temperature: 32 °F to 140 °F

To Pair a Pico Remote to a Caséta Switch or Dimmer follow the steps below: Press and hold the bottom button (off) on your Caséta dimmer or switch until the LED indicator light (s) on the switch start blinking. Once the indicator lights start blinking, release the bottom button.

Pairing a Pico Wireless Control to Lutron Roller Shades. If your shades are not part of a Lutron system, such as Caséta, RadioRA, or HomeWorks, you will need to assign a Pico Wireless Control to control your shade.

The Pico wireless control can be used as a handheld remote, table top control or wall mount control. See the corresponding section below based on the type of installation desired. Handheld remote: Slide the Blank Backplate into the back of the Pico wireless control. Tabletop control: Slide the Pico wireless control onto the Tabletop Pedestal

This install guide provides simple setup instructions for Maestro. Wireless and Caséta Wireless systems only. If you are using your. the system setup guide. If you no longer have your system setup. 2. The Pico wireless control uses one (1) CR2032 battery. (pre-installed). DO NOT use rechargeable batteries. Using improper.

View and Download Lutron Electronics Pico PJL-2B quick start manual online. Pico Line-Powered Wireless Control. Pico PJL-2B control systems pdf manual download.

Adjust lights, shades, or audio from anywhere in a space with a Pico wireless control. This versatile and easy-to-use control requires no wiring and is compatible with a wide variety of Lutron lighting and automated window treatment solutions.

For the most up to date installation diagrams, videos, and step-by-step instructions visit the Lutron Wiring Wizard. The Pico smart remote adds an additional point of control with no wires or smart hub needed. Pair your Pico remote to your Caséta switches and dimmers and control them wirelessly with a press of the button.

Important: Set up a Pico wireless control to a dimmer / switch before use. Press and hold the dimmer / switch Tap button or Off button (Figure 1) for approximately 6 seconds. Once the LED(s) start to blink slowly, release the Tap or Off button. 2.

Adding a Pico to a dimmer, switch, blind, or Sonos Home Sound System provides an additional point of control. And it only takes a few minutes to do. What can a Pico do for you? You can add a Pico to any wall surface without cutting holes, running wire, plastering, and repainting.