2019年5月22日 · MFT Digital Multi function transducer replaces a number of conventional single function transducers and thus reduces the inventory. It provides 2 digital pulse o/p for Energy and RS485 port supporting Modbus-RTU protocol for communication, and optional RJ45 port supporting Modnet protocol is also available

The MFT has been programmed to operate as an intelligent front end measuring and storing device and to communicate continuously to a Master, all the data relevant for the purpose of SCADA, through isolated RS-485 port using MODBUS-RTU protocol. The MFT is normally supplied readily pre-programmed for operation and can be directly installed

Multifunction transducer stores energy and programmed parameters into non-volatile memory. MFT can be further connected to SCADA network, PLC, other indicating instruments and monitoring systems via RS-485 Modbus RTU port.

Masibus MFT has versatile capabilities for electrical parameter monitoring and communication. It measures all sought of electrical parameters including voltage, current, PF, power and energy.

D5MFT1 is a Multifunction Power Line Transducer for simultaneous measurement of various electrical parameters of 3 Phase 3 Wire or 4 Wire electric power system. The information is available through 4 Nos. of galvanically isolated Analog Outputs and RS 485, Half Duplex Serial Communication Port over MODBUS RTU Protocol.

Digital Multifunction transducer stores energy and programmed parameters into non-volatile memory. MFT can be further connected to SCADA network, PLC, other indicating instruments and monitoring systems via RS485 modbus RTU port.

The wiring of the line for BACnet MS/TP / Modbus RTU is to be carried out in accordance with applicable RS485 regulations. AC 24...240 V / DC 24...125 V Modulating control

2019年5月22日 · Multifunction transducer stores energy and programmed parameters into non-volatile memory. MFT can be further connected to SCADA network, PLC, other indicating instruments and monitoring systems via RS-485 Modbus RTU port. Masibus MFT20 is a cost effective with versatile capabilities for electrical parameter monitoring and communication.

Basic Fail-Safe multifunction technology actuator for controlling dampers in typical commercial HVAC applications. during manufacturing. These parameters can be edited in the field via NFC and the Belimo. Assistant APP. or linkage for remote linkage connection. A visual position indicator shows the actuators. position through-out its stroke.

MFT-204 is a Multi-channel Multi-function transducer for measuring wide range of analog values in a 3-phase 4-wire asymmetrically loaded system. The output interface includes one RS 485 port and four channel 4-20 mA loop. Parameter assignment to 4-20 mA loop is field programmable.