MSD 6AL-2 4K RPM Misfire 08-31-2010, 09:01 PM. I have just installed a new MSD 6AL-2 in my Studebaker ...

2009年9月4日 · Recently I have installed an MSD 6AL-2 w/Ford Adapter Harness. Since the install, my vehicle will misfire at seemingly random times. Somedays I can drive around and not experience any misfires. Others, I will be cruising around keeping a steady rpm (1600 on the highway for example), and experience a momentary buck and power loss.

2023年12月22日 · Cavity "B" is the "MAG positive" wire and Cavity "C" is the "MAG negative" wire. The MSD Pro-Billet could use Violet for the positive and Green for the negative wires but may be Orange/Black for positive and Violet/Black for negative. The Sniper 2 ignition trigger wire (White) is connected to the MSD 6 (White) wire.

2018年1月26日 · All, I'm about to install a new MSD Pro-Billet distributor along with the 6AL-2 # 6520 ig nition box. Pretty sure I have a good idea of how to set the run curve to achieve a start retard but have a couple questions.

2013年3月8日 · Have a AL6 6425 with a MSD pro billet dist. Large red and black are connected to battery +/-. steady 12,2v Small red, steady 12,2v No power on the black/ orange to Blaster2. Ohm measured all cables, OK. Bo /Sweden

2018年4月11日 · New To the MSD forum, just need some help on the MSD Digital programmable 6AL-2 CDI ignition module. Have some questions regarding the operation of the MSD ignition module, with the portable PC plug into programming 9 pin port. Engine Type: Holden Torana 6 Cylinder race built engine with triple SU carbs. MSD equipment: -

2020年2月17日 · Setting up a 6AL-2 programmable on a blown SBC with 100 shot of nitrous. Is there a way I can setup the boost curve and a curve for the nitrous when it's engaged? Can I use the pink wire for this purpose?

2016年8月10日 · MSD 6al 2 no start part number 6421. 08-10-2016, 07:39 PM. Background. 363 Dart based Ford 8.2 deck, 8.5:1 ...

Hi My old computer crashed and I lost all my msd software. I brought a new laptop with windows 10. I tried to download the software from the msd website and using it but I cant get it to work.

2010年5月12日 · I just recently installed the MSD 6AL-2 PN 6421 in my 1986 Camaro. For some reason the Max Limit rev limiter is limiting my RPMs 1,000 RPM higher than what I have it set at. I have it programmed for 8 cyl and 3,000 RPM max limit (just for test purposes). I have the box wired according to pg. 16 for GM HEI 7-pin modules.