2013年4月19日 · I just looked on the MOL site and as the MTR was end of lifed a few years ago, there is not update that would have the potental to run on Win 7. Try running it under XP compatably and see what happen other wise you will need a differant computer with Xp on it. There is also software from other makes that also have this same problem.

2022年1月26日 · A 100w UHF MTR-2000 repeater was recently installed at our site. The owner cut the power output back to 60w by request of the site manager. The repeater is now transmitting "double beeps" over the air. These beeps were not present when the repeater was operating at full power output when installed at its previous site.

2012年3月16日 · When used as a stand-alone repeater (a/k/a an "in-cabinet repeater"), the MTR's internal controller handles transmitter keying and audio routing. However, when you go to a voted system, these functions are handled by the comparator, and you have to disable the MTR's internal controller.

2019年4月9日 · Hi, Anyone have the configuration for MTR 2000 repeater using the Zimmerman MMDVM board? A code plug or other info on how to set up the MTR 2000 repeater would be greatly appreciated. Thanks, Bill K2MCI

2021年10月24日 · I have a UHF 100W MTR2000 that is used as a GMRS repeater at 40W in a remote rural area. Had it now for about 5 years and it was working well until recently. It developed an issue where the audio was cut off and choppy. You could hear the beginning of a word (first couple of letters maybe)...

2015年9月25日 · Hello all I have a new to me MTR2000 UHF. I have upgraded from a PKR1225 and it had an option for a courtesy tone that would beep at the end of a transmission. Is there any way to do this on an MTR? I have looked high and low for for this option but cant find it. If not, is there anything else I...

2016年4月26日 · I thought that the MTR2000 was old enough that this was not the case and there was no newer software that locked it to narrow only. I thought that the latest software was RVN4148P, version R03.03.02 which I think was released in the mid to late 2000's well prior to the 2013 conversion requirement.

2013年4月8日 · Hey, I a bit new to this but I am trying to find out if this can be done. My volley currently runs one mtr2000 repeater running at 100w. No bells and whistles. Just a regular old duplex UHF repeater. the issue we are having is that …

2022年3月24日 · I operate quite a few UHF FM ham repeaters and GMRS repeaters. I have three 2-meter machines, one is an MTR-2000 and the other two are Kenwood TKR-750's. Naturally, on the bench they receive extremely well with factory equipment (no preamps, etc) so we're talking 0.35 uV for a 20 dB quieting signal on the MTR-2000, and maybe 0.45 uV for the ...

2015年10月22日 · From the MTR-2000 installation guide: Service Speaker: connects between the telephone connector on the Station Control Module and an external speaker/amplifier (with a 6 pin molex connector) via an adaptor cable; part number 0185180U01.